another wd topic

mlpankey wrote: Rod B wrote: mlpankey wrote: Ihateillinoisnazis wrote: The other day it was a 12 tractor field... Today it's 42??? Not arguing, just questioning reality. brad davis said he remembered the cross roads of dixie being a 42 tractor field  when we spoke yesterday. the only place reality needs checked is in wisconsin where egged shaped racing junk pistons and worn takeout jd linners in a engine thats smoking at the end of a pull can win     The link says 6.  I know your measureing skills are bad when we see angle finders used for valve comparisons and the indicator isn't even pointing level.  I didn't know your memory is that bad, talking to someone yesterday and today getting busted with that link.    Or the logical explanation is that it is a simple matter of someone lying to make themselves appear better.  Lies are getting as old as your love for wi.  Which brings me to another question.  You reccomend him for parts and engine work, but consistantly dis-respect him on the forums.    I read the rules for kicks.  4 mph and 20% over RPM.  You really build awesome hot rods and target the power crazies to get those kind of results.  It takes all of 60 hp to compete with those kind of rules.   Pistons are egg shaped when new.  If they were round they wouldn't work.   Sorry people, but this pankey fella is really full of BS and arrogant to boot.    I am arrogant but i know what i am talking about unlike most and every day more are seeing it as you and others post posts just like this one.

Please explain what is wrong with used sleves pressed in and bored? They are true. New sleves bought for the same purpose still need to be bored.    

Much better than buying a used motor with used sleves, used rings and used pistons don't yoy think?

Go to the classifides. I just busted you up good.

having a used piston 15 thousandths under is a worn out piston no matter how less you bore its sleeve.   I have a shop all you and rod have  is your hands in pockets without getting into ring lands etc. as for elliptical yes anyone one the pulling forum should know the skirt measures larger than the top but i forget most havent ever held a piston on this site cause their hands stay in their pockets.

I sell new ross forged pistons in 4.125 bore 2.5 compression height if anyone desires a set and the used ones go into a 55 gallon drum and the recycling yard picks them up .

Edited by mlpankey - 26 Mar 2013 at 7:18pm

mlpankey wrote: <FONT size=+0>having a used piston 15 thousandths under is a worn out piston no matter how less you bore its sleeve.   I have a shop all you and rod have  is your hands in pockets without getting into ring lands etc. as for elliptical yes anyone one the pulling forum should know the skirt measures larger than the top but i forget most havent ever held a piston on this site cause their hands stay in their pockets. I sell new ross forged pistons in 4.125 bore 2.5 compression height if anyone desires a set and the used ones go into a 55 gallon drum and the recycling yard picks them up .

Your lack of experience is really showing. Pistons don't wear 15 thousandths. Boreing is a one way operation. "No matter how less you bore it's sleeve". With pank's knowledge there's absolutly no way he has any kind of experience.

A little moror that broke the crank in one pull and finished 3 rd is better than a smoking wc being entered twice once by dad and on e by som. How many years ago are those standings you finding. You got your tale beat this year alot of fourth place finishes your proud of isnt it

Edited by mlpankey - 27 Mar 2013 at 7:10pm

Broken crank huh? Last years results. Pank claims to be doing his own cranks. Low power application at that weight and speed.

Pank's cranks new motto is " we build em with lots a purosity to save weight"

Stop makeing it so easy.

Its funny....I broke a crank ONCE....when I swapped off some stuff for this 360 inch motor..It was an original WC 4" crank welded to 5 5/8ths. Not a 4.5 crank, a WC crank. It was reground to 1 3/4 journals.  It was running with  for 7 years before I got it. Then I PUNISHED it for a year and a half more, till it finally cracked. I figure it got no less than 200 250 hooks on it before I got it. I know I put a SOLID 50 hooks on it one summer alone. SO lets call it 300 hooks, ON a 4" core crank, On 1 3/4 journal ,  IN 360 inch engine.

What Im getting it is..... here is a motor that should have NEVER lasted as long as it did, made the POWER it did, and get ABUSED the way it did. BUT IT RAN PRETTY WELL.

So PANK, whats your newest excuse for your expertly engineered POS blowing the crank out in 4 or 5 runs? You cant even cobble something together that makes noise, let alone runs dependably..QUIT interrupting positive conversation. Admit you are making  attention noises like a two year old, and leave people alone. You have become a menace to the pulling society..GO AWAY!

allright guys theres a slight modification to the plan. new rules for this year say that stock class tractors may only go 2.5 mph??? is this do able with a stock unit turining stock rpms on 28's in first gear???