This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
1951 WD w/ WD Pickup Plow and 20 Disk Harrow |
Post Reply |
Author | |
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
Posted: 11 Oct 2024 at 9:13pm |
I'm going to have to stop dragging stuff home for a while after this one. I've been looking for a Snap Coupler disk and this one popped up 3 hours away, with a 1951 WD, a pile of parts, and 3 plows. The engine even turns over slowly with the starter so I may spend an afternoon messing around with it to see if it will run.
I believe the disk is an 8.5' 20 series. It needs new disks, a few scrapers, and probably bearings. |
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Sponsored Links | |
Dennis J OPKs
Silver Level Joined: 12 Sep 2009 Location: Overland Park, Points: 433 |
Post Options
Thanks(0)
|
You're on a roll. Back to the WFE thread-I don't know if that clutch kick-out was an AC item or after market. Strangely my 45 has one & it came out of Knecht Imp. in Paola. Not that far from Lawrence or Wellsville. Must be those KS rocks, never saw it on any tractors in NE. I dismantled mine, just one more thing to get in the way since it's not doing any plow work. Your time will be taken up with your additions and you've definitely got the fever.
|
|
IBWD MIke
Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3733 |
Post Options
Thanks(0)
|
Nice score wjohn! It seems like when it rains, it pours. It's raining Allis on you, well, and some Farmalls too. I'm curious what the drawbar on top of the disc is for?
|
|
Gary
Orange Level Access Joined: 13 Sep 2009 Location: Peterborough,On Points: 5391 |
Post Options
Thanks(0)
|
WOW, I can't believe the condition of the sheet metal ! Especially the tail end of the rear fenders. No jams, no scratches, no cracks That Tractor is a museum piece. What is the Serial Number? Gary |
|
dr p
Orange Level Joined: 24 Feb 2019 Location: new york Points: 1154 |
Post Options
Thanks(0)
|
Clutch kickout is allis. Listed in plow book
|
|
Mikez
Orange Level Access Joined: 16 Jan 2013 Location: Usa Points: 8391 |
Post Options
Thanks(0)
|
Nice load. You are on a roll lately
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
All of the ones I've seen are AC. My December 1954 Moldboard Plows parts catalog shows the WD Clutch Release on page 94. I would like to find one - doubt I'll plow much but I will on occasion, and big rocks! It looks like a guy could make one if necessary with some measuring and cutting, bending, and welding.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
Good question. I have been poking around at pictures online. The two bars at the end have a slight downwards (or upwards?) curl at the end of the two points where it would have connected to whatever implement it was for. It doesn't look like any Snap Coupler disk, rake, rotary hoe, etc. that I am familiar with. It's closest to my field cultivator hitch but that doesn't have the curved pieces at the ends.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Michael V (NM)
Orange Level Access Joined: 12 Sep 2009 Location: NM Points: 2407 |
Post Options
Thanks(0)
|
Let me see if I can get you some pictures of that drawbar hitch. It's part of a lister type planter toolbar thing, but the ones I have are for pin hitch WD's
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
The tractor SN is WD92996. The engine is WD300982PA so it's only about 10000 engines into production with the tall head. Just before the camshaft thrust hardware changes. It's been repainted before but does have very good fenders. The WD-45 I got last weekend had the usual destroyed back fender sections.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
That would be great, thanks! I may end up trying to mount a toolbar on it to hold row units or make a carrier or lift boom.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Michael V (NM)
Orange Level Access Joined: 12 Sep 2009 Location: NM Points: 2407 |
Post Options
Thanks(0)
|
Here's some pictures
Edited by Michael V (NM) - 12 Oct 2024 at 10:56am |
|
Michael V (NM)
Orange Level Access Joined: 12 Sep 2009 Location: NM Points: 2407 |
Post Options
Thanks(0)
|
Cool finds,, I'm always lookin for WD stuff,, but it's sure slim pickins around here,, or they asking a small fortune for them
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
Thanks for posting those pictures. It's interesting that the front of the hitch is supposed to be up in front of the pin/snap coupler bell on the tractor. Someone put a snap coupler eye on the front of this. Too bad it didn't come with the depth adjust levers and the toolbar. That would be handy. Still, it's about 2x the size of the hitch weldment for the spring tooth field cultivator so it should be beefy.
Maybe even bale spear frame material?
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
I finally got some time with this tractor yesterday. I cleaned off the points. The rotor and cap didn't have much corrosion. Pulled the spark plugs and #s 1 and 3 were very rusted in the threads, but looking down into the cylinder the section I could see wasn't rusty.
I grabbed a battery out of another tractor and realized that the size of the cable terminals were set up for smaller and larger posts w/ the battery as positive ground. I hooked the battery up and did not turn on the ignition, and it cranked the engine over no problem. I realized that this tractor is still 6V positive ground so I am going to have to see if I can revive one of my old 6V batteries, buy a new one, or convert it to 12V. I'm putting the carb back together this morning. It would be nice to see if I can get this tractor running for a minute or so and then spend more money and effort if I know it's a runner.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Dennis J OPKs
Silver Level Joined: 12 Sep 2009 Location: Overland Park, Points: 433 |
Post Options
Thanks(0)
|
You can use 12v, just don't crank very long or turn on any lights-not that they would work anyway.
|
|
Dennis J OPKs
Silver Level Joined: 12 Sep 2009 Location: Overland Park, Points: 433 |
Post Options
Thanks(0)
|
Follow up, depending on if mag or distributor you'll need a 12v coil or a resistor if it has a distributor. Sorry for the omission now that I think about it.
|
|
wjohn
Orange Level Joined: 19 Jan 2010 Location: KS Points: 1992 |
Post Options
Thanks(0)
|
Thanks - yes I would borrow a resistor off of another tractor if I wind up having to use a 12V battery in this for testing. Honestly the wiring harness on this tractor would need to be completely replaced if I were to get it running well enough to use it. It might still be original.
|
|
1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |