CA cultivators ?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Since it is still raining, I decided to try to mount my (new to me) front cultivators on the CA.  I got the depth lever/lift assembly mounted ( a lot of fun by myself), and see that the two plates that the lift cylinder hooks to don't line up....one is rotated about 10-15 degrees forward of the other when the depth levers are in the same position. Nothing looks bent or re-welded...but it seems the plates should be in the same position?? 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Eldon (WA) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Spokane, WA Points: 7765	Post Options Post Reply Quote Eldon (WA) Report Post Thanks(0) Quote Reply Topic: CA cultivators ? Posted: 02 Jun 2010 at 9:55pm
	Since it is still raining, I decided to try to mount my (new to me) front cultivators on the CA. I got the depth lever/lift assembly mounted ( a lot of fun by myself), and see that the two plates that the lift cylinder hooks to don't line up....one is rotated about 10-15 degrees forward of the other when the depth levers are in the same position. Nothing looks bent or re-welded...but it seems the plates should be in the same position??
	ALLIS EXPRESS! This year:

Sponsored Links

Dwayne TX Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 11 Sep 2009 Location: Texas Points: 221	Post Options Post Reply Quote Dwayne TX Report Post Thanks(0) Quote Reply Posted: 03 Jun 2010 at 10:04am
	Eldon - either email me a picture or post one one here of the parts your working on and I'll send you one of how mine is set up. I've got a manual for the CA cultivators I could refer to, also.

Eldon (WA) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Spokane, WA Points: 7765	Post Options Post Reply Quote Eldon (WA) Report Post Thanks(0) Quote Reply Posted: 03 Jun 2010 at 6:31pm
	Thanks Dwayne....it looks like I am missing the extension that goes from the cylinder to the depth arm assy...could use a pic of that. It would show how it hooks to each side. I used a piece of square tubing slipped over the end of the cylinder and bolted it to each lift tab, but the tubing was too light and bent already...plus I had interference with on of the gangs when I lifted it up. Also need see what the brackets for the rear scratchers look like...I'm missing them also. It looks like they might mount to the drop axles??
	ALLIS EXPRESS! This year:

Eldon (WA) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Spokane, WA Points: 7765	Post Options Post Reply Quote Eldon (WA) Report Post Thanks(0) Quote Reply Posted: 04 Jun 2010 at 10:27pm
	Built another HD linkage today for the lift cylinder and got that working good....now I just have to get the row spacing set 2" further out (adjusting nuts are rusty and rounded off), and new shovels put on....may do without the scratchers this year...
	ALLIS EXPRESS! This year: