| Author |
 Topic Search  Topic Options
|
Hubnut 
Orange Level
Joined: 30 Jul 2014
Location: Gainesville, FL
Points: 1817
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Thin gasket supplier
Posted: 20 Nov 2015 at 2:09pm |
|
I need the really thin gasket paper for my B oil pump. As I understand it, the paper gasket should be around 0.007 inches. The thinnest paper I can find is 0.015 inches. Any suggestions for suppliers of this paper? Or can I use a paper bag or piece of paper?
|
 |
|
Sponsored Links
|
|
|
DougS
Orange Level
Joined: 03 Nov 2011
Location: Iowa
Points: 2490
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 2:43pm |
|
That's about 3 human hairs. I don't know if wax paper would hold under the heat or not. Parchment paper probably would. I'd think you'd want something that compresses a little.
|
|
Hubnut
Orange Level
Joined: 30 Jul 2014
Location: Gainesville, FL
Points: 1817
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 3:08pm |
|
Yeah, I guess it will compress. I'll try the 0.015 and see.
|
|
Rick
Orange Level
Joined: 11 Sep 2009
Location: Jonesburg,Mo.
Points: 3695
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 3:22pm |
|
You could always get the correct "already made" gasket from Agco. I can still get the hydraulic pump and PTO gear box gaskets for the WD/WD45 from them, so the oil pump gasket for the B/C/CA should be available, I would think. Rick
|
|
SHAMELESS
Orange Level
Joined: 13 Sep 2009
Location: EAST NE
Points: 29486
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 4:45pm |
|
what happens if the gasket is thicker?
|
|
SHAMELESS
Orange Level
Joined: 13 Sep 2009
Location: EAST NE
Points: 29486
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 4:45pm |
|
would blue glue hold?
|
|
Hubnut
Orange Level
Joined: 30 Jul 2014
Location: Gainesville, FL
Points: 1817
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 5:45pm |
|
The end play was too great with the 0.015 inch gasket. I got some 0.007 gasket paper and that worked within the specification for end play (0-001-0.003). Thanks for the help.
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24889
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 5:54pm |
|
I was wondering how thick (thin ??) an aluminum pop can is ? it'd compress a weee bit.
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Dick L
Orange Level
Joined: 12 Sep 2009
Location: Edon Ohio
Points: 5093
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 6:52pm |
 SHAMELESS wrote:
what happens if the gasket is thicker? |
Will not hold prime!
|
|
Butch(OH)
Orange Level
Joined: 11 Sep 2009
Location: Lucerne Ohio
Points: 3842
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 8:46pm |
Dad used to call it onion skin paper, not sure if that is a technical term or farm jargon? Every B/C pump I have worked on had enough wear on the end of rotor and blades that the gasket is not needed for clearance. I flat file the case and cover only enough to remove burrs then bolt the cover on without a gasket. if it turns over with no stiffness take the cover off add a THIN bead of silicone bolt it back together and its ready to go.
Edited by Butch(OH) - 20 Nov 2015 at 8:47pm
|
|
Chalmersbob
Orange Level
Joined: 11 Sep 2009
Location: Pennsylvania
Points: 2122
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Nov 2015 at 10:06pm |
|
When I bought a C I got several gasket kits and one had multiple thicknesses of gaskets for the oil pumps. Bob
|
|
4 B's, 1 C's,3 CA's, 2 G's WD, D14, D15, B-1, B10, B12, 712S,
|
|
