![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
HD-4 stopped moving |
Post Reply ![]() |
Author | |
rodnil ![]() Silver Level ![]() ![]() Joined: 15 Sep 2009 Location: illinois Points: 247 |
![]() ![]() ![]() ![]() ![]() Posted: 12 Nov 2015 at 9:09am |
My HD-4 has a 6-way blade. I was using it yesterday to remove some small brush (Russian Olive). I had been working it for 3 t0 4 hours with no issues. I was backing up to line up with some brush and I stopped by moving the lever to the neutral position then moved the lever to go forward and nothing happened. I moved the lever to reverse and no movement. Several movements of the lever for forward and reverse produced nothing. Where do I start ? Is there something I need to look at that may be a simple fix or am I looking at a serious problem. Thanks for any and all help. Rodney.
|
|
![]() |
|
Sponsored Links | |
![]() |
|
Tracy Martin TN ![]() Orange Level Access ![]() Joined: 11 Sep 2009 Location: Gallatin,TN Points: 10736 |
![]() ![]() ![]() ![]() ![]() |
If you heard no strange noises, I would figure your linkage or valve is the culprit. Could be more serious. Will the blade move up and down? HTH Tracy
|
|
No greater gift than healthy grandkids!
|
|
![]() |
|
rodnil ![]() Silver Level ![]() ![]() Joined: 15 Sep 2009 Location: illinois Points: 247 |
![]() ![]() ![]() ![]() ![]() |
I didn't try the blade to see if it would go up or down. The weather is rough here today. I'm planning on going to the location tomorrow and I'll check to see if it moves. Now that you mentioned hearing a noise I did hear something unusual coming from the front of the dozer about an hour before it stopped moving. It was not real loud and it only lasted about 1 or 2 minutes and never heard again. Thanks, Rodney
|
|
![]() |
|
Coke-in-MN ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Location: Afton MN Points: 41947 |
![]() ![]() ![]() ![]() ![]() |
Blade is separate hyd from fwd/rev - would start with valve body of clutch pack - check fluid level for the converter - clutches - then go from there - which gear is trany in ?
When it just quits with no noise think fluid in not shifting clutch pack could be broken springs in valve body or ?
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
![]() |
|
rodnil ![]() Silver Level ![]() ![]() Joined: 15 Sep 2009 Location: illinois Points: 247 |
![]() ![]() ![]() ![]() ![]() |
It's in 2nd gear. Thanks for the information. Rodney
|
|
![]() |
|
JohnCO ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
![]() ![]() ![]() ![]() ![]() |
Check the linkage first, may have come loose somewhere.
|
|
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |