HD7 Fluids

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I'm painting my HD7 this weekend .. starting to look nice .. Next weekend will be changing oil and all the filters .. Anyone know how much oil a 3-71 holds .. Will the 
fuel filters need to be blead after changing , or if I fill them will they gravity feed .. 
What other oil should I be checking .. there must be rearend oil , trany oil .. I see oil
plugs on the back sprockets on the inside of the tracks .. this machine looks like it has some of the old type button grease zerks .. should I change them or find a grease end to grease them .. Thanks again for your help ... Mark

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pongo56353 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 02 Jan 2010 Location: Milaca Mn Points: 17	Post Options Post Reply Quote pongo56353 Report Post Thanks(0) Quote Reply Topic: HD7 Fluids Posted: 18 Apr 2010 at 9:25am
	I'm painting my HD7 this weekend .. starting to look nice .. Next weekend will be changing oil and all the filters .. Anyone know how much oil a 3-71 holds .. Will the fuel filters need to be blead after changing , or if I fill them will they gravity feed .. What other oil should I be checking .. there must be rearend oil , trany oil .. I see oil plugs on the back sprockets on the inside of the tracks .. this machine looks like it has some of the old type button grease zerks .. should I change them or find a grease end to grease them .. Thanks again for your help ... Mark

Sponsored Links

Coke-in-MN Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41588	Post Options Post Reply Quote Coke-in-MN Report Post Thanks(0) Quote Reply Posted: 18 Apr 2010 at 10:44am
	Your HD7 would be similar to the HD5, as far as lube. 3-71 Detroit use Rotella or other Series 3 or higher oil, I use 15/40 Rotella, those lower plugs are final drive and use GL5 lube. 80/120, Trany and ring gear use a GL5 or can use a high grade oil SAE 50 or above. Track rollers and such use a semi-fluid or SAE90 or above as they are timken bearings and not bushings. Could use gun grease grade 000 but not to pressure fill with normal zerk Pre fill filter and housing and the 71 will most times prime itself
	Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful."

DonBC Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Location: Courtenay, BC, Points: 913	Post Options Post Reply Quote DonBC Report Post Thanks(0) Quote Reply Posted: 18 Apr 2010 at 12:11pm
	It would be of great benifit to you if you could aquire all the manuals for this machine. There may be some reproductions or used manuals available.
	Jack of all trades, master of none