This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Construction and other equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


344 buda engine toruques
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
kinghunter View Drop Down
Silver Level
Silver Level
Avatar

Joined: 30 Jan 2010
Location: Kansas/Missouri
Points: 408 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kinghunter Quote  Post ReplyReply Direct Link To This Post Topic: 344 buda engine toruques
    Posted: 13 Feb 2015 at 8:22pm
could i get the torque specs on the 344 buda in a hd 6.

head torques
rod bearing torques
and valve lash specs for intake and exhaust.
and i'm sure i'm missing something.
and i sure want to think everyone on my previous post you all don't know how much help you are to a young guy like me thats trying to carry on a tradition of running all allis chalmers on my farm.
Back to Top
Sponsored Links


Back to Top
JC-WI View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: wisconsin
Points: 34278 		Post Options Post Options   Thanks (0) Thanks(0)   Quote JC-WI Quote  Post ReplyReply Direct Link To This Post Posted: 13 Feb 2015 at 10:08pm
 
Fire order 1342
warmed up (160-185) valve lash Intake .016" and Exhaust  .020" . 
 After that, they may be set cold at Intake .018" and Exhaust .022"
Mains;  Front, Intermediate and Rear main caps 3/4" nuts 210-230 lbs. ft.  Middle main cap, 5/8" nuts, 160-170 lbs. ft.
Rod cap nuts, 120-130 lbs. ft.
Cylinder sleeve flange standout .006" to .009" abovethe flat of surface of block.. and must not be more than.002" between adjacent cylinders.
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
Back to Top
kinghunter View Drop Down
Silver Level
Silver Level
Avatar

Joined: 30 Jan 2010
Location: Kansas/Missouri
Points: 408 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kinghunter Quote  Post ReplyReply Direct Link To This Post Posted: 14 Feb 2015 at 8:20am
that explains it all thanks alot. 
Back to Top
JC-WI View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: wisconsin
Points: 34278 		Post Options Post Options   Thanks (0) Thanks(0)   Quote JC-WI Quote  Post ReplyReply Direct Link To This Post Posted: 14 Feb 2015 at 11:44am
A picture is sometimes worth a thousand words... Wink
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
Back to Top
DMiller View Drop Down
Orange Level Access
Orange Level Access


Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 33669 		Post Options Post Options   Thanks (0) Thanks(0)   Quote DMiller Quote  Post ReplyReply Direct Link To This Post Posted: 14 Feb 2015 at 6:24pm
It doesn't seem to be in the manual I have but a good caution on stud mounted anything. From Detroit Diesel and Mack Truck were notes in their manuals to verify the studs at bottom of threaded bores prior to tightening head retainer nuts.
Back to Top
kinghunter View Drop Down
Silver Level
Silver Level
Avatar

Joined: 30 Jan 2010
Location: Kansas/Missouri
Points: 408 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kinghunter Quote  Post ReplyReply Direct Link To This Post Posted: 14 Feb 2015 at 8:12pm
thanks again everyone!!!!


Kent
Fletcher Farms
Fletcher logging
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.125 seconds.


Help Support the
Unofficial Allis Forum