This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Early B-10 restoration |
Post Reply | Page 12> |
Author | |
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
Posted: 28 Jan 2014 at 9:46pm |
I know how much everybody likes pictures- I pulled the motor and tranny so I could get it into the basement for the winter.
Built a handy tractor table downstairs behind the furnace in my makeshift man cave.
Stripped it down
Repaired the cracks in the frame by the BGB
Sandblasted
I have put a ton of work into this project over the last year. Repaired the steer axle pivot wear, put new seals in the bevel gear box, rebushed the spindles, etc, etc. These pictures show a small fraction of the process.
More to come.....
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
Sponsored Links | |
Charlie175
Orange Level Joined: 11 Sep 2009 Location: Shenandoah, VA Points: 6358 |
Post Options
Thanks(0)
|
Very nice!
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
|
Michigan farmer
Bronze Level Joined: 18 Jan 2014 Location: Bancroft, Mi Points: 11 |
Post Options
Thanks(0)
|
excellent restoration!
tons of dedication I have two working tractors that someday will look new again |
|
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11816 |
Post Options
Thanks(0)
|
Looks great man! Keep them pics coming. Some people don't really know what goes into a resto till they do one. And it doesn't matter whether its big or small. There's a lot of time, work, and good hard earned money put into them! But the end result is quite rewarding! This project is coming along super nice! Nice job! As my pal Bill Long says: "They're nicer than they were new from the factory". He's right! They are!
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
stan-tn
Bronze Level Joined: 11 Sep 2009 Location: Maryville TN Points: 39 |
Post Options
Thanks(0)
|
Very Nice! Guess I need to quit making excuses why I can't work in my basement and get started on my B-12
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
Heres how I got into the hobby, someone gave me a 611 Hydro. BeforeAfter
I sold that one because it is way too small for me, and being a lawn tractor, it doesn't have any attachments for playing in the dirt!
By the way, it is an early B-10, someone along the way slapped the bee decals on it and painted the motor and trans black. There is original yellow under the black.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
split51
Orange Level Joined: 13 Sep 2009 Location: Guthrie, OK Points: 713 |
Post Options
Thanks(0)
|
Where did you find the toolbox? That is one accessory I have not been able to located yet.
Your restoration in looking good. |
|
1929 20-35 sn17662
B1 w/snow blade B10 w/sickle mower B110 w/mower deck B110 w/tiller B112 w/grader blade B210 w/plo |
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
The guy is a tin knocker by trade, so it is built perfect. He hasn't been around since September, I sent him a PM, I will let you know if he gets back to me. |
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
Seth Souerdike
Orange Level Joined: 22 Nov 2011 Location: Cutler Indiana Points: 4113 |
Post Options
Thanks(0)
|
OH MY WORD that is purely a beautiful job your doing keep up the good work can't wait to see her when shes all done
|
|
There are no atheist in foxholes.
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
So, thats it for now. I need my paint booth to warm back up (takes until June, usually) then I can paint the motor and trans, fuel tank etc. And finish her off.
Thanks for looking!
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
rdmanone
Bronze Level Joined: 18 Jan 2014 Location: Florida Points: 42 |
Post Options
Thanks(0)
|
Holy Smokes that is so awesome. Great job.
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8289 |
Post Options
Thanks(0)
|
Very nice restoration! The tractor is looking great.
Regards, Chris |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Dave H (NE)
Silver Level Joined: 11 Sep 2009 Location: Western NE Points: 288 |
Post Options
Thanks(0)
|
I have tool boxes for the B1 and B10 tractors. They are 10 in. long. The box for the B12 and up used a 12 in. long box. Very nice job on the restore.
|
|
Bull
Orange Level Access Joined: 28 Sep 2010 Location: Lamar, Missouri Points: 589 |
Post Options
Thanks(0)
|
Hey Marv,
Did you have your seat recovered or did you buy all new? |
|
WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade
|
|
Little Wolfie
Bronze Level Joined: 18 Oct 2012 Location: Ontario Can Points: 17 |
Post Options
Thanks(0)
|
Great job!
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
I bought the seat from a woman named Mary- I think she lives in Indiana or Ohio. She does excellent work. I don't know what she all makes seats for. Her e-mail is kmgeartheart@juno.com
She said to go ahead and post her e-mail if other people were interested.
I think it was $80 for the seat, backrest, and two armrests.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
Bull
Orange Level Access Joined: 28 Sep 2010 Location: Lamar, Missouri Points: 589 |
Post Options
Thanks(0)
|
Thanks Marv
|
|
WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade
|
|
tractorman
Orange Level Joined: 22 Sep 2009 Location: west central wi Points: 1046 |
Post Options
Thanks(0)
|
marv you do great work! where'd you get that great decal the round white one ?
I still have the bee 2 that a may sell and am thinking about selling the sickle mower as well!
|
|
Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
The badge on the grille is from Steiner Tractor- part number ACS138. The decal on the toolbox came in the decal kit, I'm not sure where its supposed to go so I cut it out and slapped it on the toolbox. I think it looks pretty good. |
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3542 |
Post Options
Thanks(0)
|
where did you get the seat and tool box also dash panel decal and steering wheel logo
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
The seat and toolbox are mentioned above. The decal kit is from maplehunterdecalstexas.com
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3542 |
Post Options
Thanks(0)
|
what about the seat frame
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
The seat frame is original. |
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
Finally got back to it....
Built a table so I can reassemble standing up out in the shed as well. Slowly but surely.....
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
rdmanone
Bronze Level Joined: 18 Jan 2014 Location: Florida Points: 42 |
Post Options
Thanks(0)
|
Wow that looks great.
Edited by rdmanone - 16 Aug 2014 at 9:18pm |
|
AJ
Orange Level Joined: 31 Oct 2010 Location: mo Points: 5244 |
Post Options
Thanks(0)
|
Did you make your grill or buy one?
|
|
Can't fix stupid
|
|
littlemarv
Orange Level Joined: 10 Jun 2013 Location: Wisconsin Points: 1829 |
Post Options
Thanks(0)
|
The grill is from Wells Implement.
Look under lawn and garden, B series decals and parts.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
|
macvette
Orange Level Joined: 13 Jun 2011 Location: nekoosa, wi Points: 1657 |
Post Options
Thanks(0)
|
It will be ready to bring to the Nekoosa Giant Pumpkinfest tractor and small engine show on Saturday, October 4, 2014.
I think folks would be interested to see the before and after on this. Course, you can bring your bigger AC too, if you have room on your trailer! Look forward to seeing you then. Edited by macvette - 18 Aug 2014 at 3:24pm |
|
offdutyangler
Silver Level Joined: 01 Jul 2014 Location: Madison WI Points: 88 |
Post Options
Thanks(0)
|
Very, very nice
|
|
1941 "WC" and a 1976 712h
|
|
HudCo
Orange Level Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3542 |
Post Options
Thanks(0)
|
every detail on this tractor is excellant hope to have my 101 looking that good
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |