This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
7020 Pulling Tractor |
Post Reply |
Author | |
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
Posted: 24 Aug 2012 at 6:16pm |
Check out my Pulling Tractor 7020AC with a 7045 426 Engine. Many other upgrades as well. No more Rotary Pump====Bosch Inline!!!!! Tell me what you think!!!! |
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
Sponsored Links | |
Bob D. (La)
Orange Level Access Joined: 12 Sep 2009 Location: Louisiana Points: 25529 |
Post Options
Thanks(0)
|
I'm not into pulling but it looks pretty sweet setting on the trailor.
|
|
When you find yourself in a hole,PUT DOWN THE SHOVEL!!!
|
|
Peterson
Orange Level Joined: 05 Mar 2011 Location: Westboro, Wi Points: 862 |
Post Options
Thanks(0)
|
Lets see more of the engine and what you got for turbos and injectors. More specs!! lol
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
Please excuse the paint colors!!!! 4440 John Deere Injector Pump= Stock Turbo HX40 from 8.3 Cummins= Works Very Good!!!! Injectors are stock Bosch Injectors. Fuel is Maxxed out on stock pump,runs very hard for what it is. Makes about 40 pounds boost, with a little fire out the top of pipe!!!! |
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
Peterson
Orange Level Joined: 05 Mar 2011 Location: Westboro, Wi Points: 862 |
Post Options
Thanks(0)
|
What did you do to the tractor to hold the power? PD trans?
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 8108 |
Post Options
Thanks(0)
|
Very nice !! Luv the 7000 series style !!Just curious on the engine setup, a 426 wasnt factory on the 7020 ; did u get the ok from the guys you pull with ?Most of the time it has to match factory sheetmetal to engine
Edited by DougG - 25 Aug 2012 at 8:30am |
|
Peterson
Orange Level Joined: 05 Mar 2011 Location: Westboro, Wi Points: 862 |
Post Options
Thanks(0)
|
Then just put 7045 stickers on it. Lol
Also are they stock 7045 injectors or 7080 injectors? Edited by peterson - 24 Aug 2012 at 8:48pm |
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 8108 |
Post Options
Thanks(0)
|
Where/ when u gonna be pullin it? ? Would like to see her run
|
|
cwhit
Orange Level Joined: 12 Sep 2009 Location: Sigel IL Points: 982 |
Post Options
Thanks(0)
|
Looks heavy. What weight class does it pull?
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
Still has stock 7045 Injectors, Power Director is a 7080 complete Unit they have 1 more clutch disc on low and high than 7010-7060. Will be pulling September 22nd at the pull I have been advertising in Tennessee on here.
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
Pulls in 10,500 Farmstock and up
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
7060
Orange Level Joined: 16 Sep 2009 Location: Missouri Points: 1148 |
Post Options
Thanks(0)
|
Thats a nice looking tractor. Im wanting to build one based off of a 7030, and start out pulling 10,200# Heavy Superfield. Does yours still have 3pt housing and pto? Would it be possible to get a picture of the back end?
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
My 3 pt arms are off and drawbar gone. I took a 6080 weight bracket cut in half and welded to my drawbar support to hang weights so i can still use the factory weight locks. I had this tractor below 9500lbs but I had a steel front axle support I made (still have it) and a 5.9 cummins in it. Mine has the 5spd Power Director I can pull 2nd High High and 3rd high High if track is loose with 20.8x38 rubber. Still Very Happy with Tractor. Doesn't sound like AC Engine anymore, it favors a cross between a Deere and Cummins it has lots of Low end Torque which it was missing before the pump swap and turbo upgrade. |
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
cotncrzy
Orange Level Joined: 07 Oct 2009 Location: TENNESSEE Points: 599 |
Post Options
Thanks(0)
|
Hey Joe,
I have saw you run, Pulaski, and Lawrnceburg. Good running tractor, I have been meaning to get around to see you. We pull in the light antique classes, 3500# 4000# and 4500#.
|
|
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!
|
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 8108 |
Post Options
Thanks(0)
|
Dang i,m full of questions ; what did the hubs come off of to have the 10 holes ? I,m not to familar with the big AC,s - isnt that a 3.58 in axle ? Whats compatable ?
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
They came off a 7040, I think some 7020's have a smaller axle this one was the same as the 7040. Not sure whats compatible. Just come on down to Lynnville Tn September 22nd to the tractor pull and I'll answer any question I can.
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
DarrylinWA
Orange Level Joined: 12 Sep 2009 Location: Amarillo Texas Points: 1898 |
Post Options
Thanks(0)
|
Looks nice Joe. In fact, my 7030 is on the trailer right now to cut the top of the cab off the same as yours. Looks great and nice job.
Take care, Darryl
|
|
B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling.
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
The first thing I would do if yours is a power director is rebuild the clutch pack with new piston seals so it will not have the delayed shift. It's night and day difference between an old unit and a fresh rebuilt one. Every little bit will help. Thanks for all.
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
rmdiesel91
Silver Level Joined: 06 Jul 2010 Location: WI Points: 53 |
Post Options
Thanks(0)
|
Very nice tractor! Are you still using the factory connecting rods? I know they were definetly the weak link in these engines. How hard is it to cut the cab?
|
|
AC WD45 (sold), 1976 AC 185, 1976 AC 7040
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
I have the 1-3/4 rods with lubricating jets on end and new rod bolts but that is all. Cutting cab was easy sawzall or torch.
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20528 |
Post Options
Thanks(0)
|
If you are really using "stock" 7045 injector tips, they are only .0128" (4 holes) hole size. Tractor will make more HP and your injection pump will last longer if you switch to injector tips with .0200" (4 holes)hole size and set them at 2800 psi. You to have them made, they aren't available from AGCO that big.
|
|
Smokey Joe
Silver Level Joined: 29 Aug 2010 Location: Tennessee Points: 189 |
Post Options
Thanks(0)
|
I was using the stock ones I have switched to Mack truck tips that have a 9mm tip with the same spray angle as ac, had to drill head out. They are a good running injector, my diesel shop had these on hand. This tractor had the Bosch Injectors from Factory.
|
|
210,220,7010 AC,7020 AC,7040 AC,7045 Pedal Tractor, 8050& 8070 and Parts and Pieces of Many More!!!
|
|
Peterson
Orange Level Joined: 05 Mar 2011 Location: Westboro, Wi Points: 862 |
Post Options
Thanks(0)
|
hey joe, when you put the mack tiped injectors in the engine, did you turn the injectors 90* in the head? bc if you didnt, your spraying fuel onto the head. Im putting the same nozzles into a set of injectors and i found it out after i bought the tips.
|
|
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
|
O.P.S. Heads
Orange Level Access Joined: 02 Jan 2013 Location: Iowa Points: 574 |
Post Options
Thanks(0)
|
I agree. Be sure the injectors are oriented correctly for the Mack nozzles. This will require a different injector hold down if needed. There are a few different Mack nozzles. You may have one that works without turning the injector in the head.
If you ever get to a point where you have 400 or more cc's of fuel delivery from your pump it will help to dual feed the injectors and nozzles as well. The stock fuel passage diameter through the Bosch injector body is small. Like .062" dia. Your stock A pump is probably no where close to that yet so you should be fine. Excellent choice on the turbo for what you have. Post video when you can. Good luck. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |