| Author |
 Topic Search  Topic Options
|
Ed (Ont) 
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1570
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Charging 8V battery
Posted: 26 Jan 2026 at 4:05pm |
|
My friend dropped off an 8V battery out of a 1946 Ford that someone had installed. What is best way to try to charge this? I have several chargers but nothing 8V. I think the battery is no good. I will check voltage of it first and go from there. Thx.
Edited by Ed (Ont) - 26 Jan 2026 at 9:37pm
|
 |
|
Sponsored Links
|
|
|
WF owner
Orange Level
Joined: 12 May 2013
Location: Bombay NY
Points: 5136
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2026 at 4:13pm |
You should be able to charge it with a 12-volt charger on the lowest setting, without hurting anything.
Several battery chargers had a single setting for "12-volt low - 6-volt fast charge".
Edited by WF owner - 26 Jan 2026 at 4:15pm
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 89840
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2026 at 4:19pm |
|
and if you have a volt meter, connect it across the terminals and monitor as the battery is being charged with the 12v charger..
|
|
Like them all, but love the "B"s.
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1570
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2026 at 5:01pm |
Thanks guys! 
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7597
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 60 minutes ago at 4:21pm |
I was just talking to my starter and alternator repair shop a few days ago and got on the subject of 8 volt batteries in 6 volt systems. In short, they DON'T work! The maximum output of a 6 volt generator is only 7.2 volts, so the 8 volt battery will never get fully charged, instead it keeps draining.
A 6 volt battery with a 6 volt electrical system that actually WORKS is a far better choice - a good working generator and very thick battery cables.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Les Kerf
Orange Level
Joined: 08 May 2020
Location: Idaho
Points: 1541
|
Post Options
Thanks(0)
Quote Reply
Posted: 8 hours 55 minutes ago at 6:26pm |
 DSeries4 wrote:
I was just talking to my starter and alternator repair shop a few days ago and got on the subject of 8 volt batteries in 6 volt systems. In short, they DON'T work! The maximum output of a 6 volt generator is only 7.2 volts, so the 8 volt battery will never get fully charged, instead it keeps draining.
A 6 volt battery with a 6 volt electrical system that actually WORKS is a far better choice - a good working generator and very thick battery cables. |
Actually, they work well enough that Allis-Chalmers offered it as standard equipment on the W226 Power Units.
It is a simple matter to adjust the Third-Brush type generators to properly charge an 8 Volt battery, my late Father-in-law ran his WD this way for decades with no ill effects.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 89840
|
Post Options
Thanks(0)
Quote Reply
Posted: 8 hours 48 minutes ago at 6:33pm |
a 6 volt generator NOT CONNECTED TO A BATTERY, will put out about 14 volts... A 12 v generator NOT CONNECTED TO A BATTERY will put out 28 volts... I have measured that several times....... The BATTERY is the SINK or REGULATOR for the gennerator.... So when you connect a 6v generator to a 6v battery you will get 7.2 volts or so..... Connect that same generator to a 12 volt battery and it will be around 13 volts...
The BATTERY is more or less a REGULATOR of the voltage.... remember the old days when they said "dont pull the battery terminal off when truck is running" ??... you can blow out the head lights or other equip when the generator voltage SPIKES..
You may not get a lot of CURRENT or AMP output... but you will get a lot of VOLTAGE.
|
|
Like them all, but love the "B"s.
|
|
55allis
Orange Level
Joined: 30 Jun 2020
Location: Griswold Iowa
Points: 1255
|
Post Options
Thanks(0)
Quote Reply
Posted: 4 hours 44 minutes ago at 10:37pm |
|
If I’m understanding this correctly someone could run the old 6v cutout on a 12v battery without any issues?
I’ve got a 45 gas that had the 6v cutout until I put a 12v regulator on it that was apparently a dud, it don’t charge worth a crap anymore.
It did charge for a bit so I’m guessing something burned out inside.
I never knew a 8 volt battery existed for a car…
|
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors 
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 12060
|
Post Options
Thanks(0)
Quote Reply
Posted: 2 hours 43 minutes ago at 12:38am |
In most cases, an 8V Battery is a bandaid. You're much better off purchasing a 6V Battery for your 6V system. Just make sure the Gennie is setup on the money and you won't have any problems. In the time the Tractor isn't used, keep a Battery tender on it to keep the Battery "active". You'll get a lot more longevity out of the Battery, and when you need the Tractor, the Battery is fully charged, ready to rock n' roll, and the Tractor fires right up. If you use the Tractor in the Winter months, make sure you install a lighter oil for the cold Winter months.. HTH Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
