| Author |
 Topic Search  Topic Options
|
Tnewsome 
Bronze Level
Joined: 23 hours 14 minutes ago
Location: Georgia
Points: 5
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 1981 Gleaner F2 Fuel Issue
Posted: 22 hours 36 minutes ago at 4:12pm |
|
I know this has probably been discussed, but I’m having no luck finding the solution. I have a new to me Gleaner F2 with the Allis Chalmers 4 Cylinder Turbo Diesel Engine in it. I have fuel all the way to the port where it enters the injection pump, but can’t get anything out of any of the four injector line ports coming back out of the injection pump. This machine has been sitting for the last 8-10 years. Do we think it is the fuel shut off solenoid inside the top of the injection pump? Looking for pointers. I haven’t taken the top off of the injection pump yet to check, just wanted to gauge the audience’s opinion first. Any help or pointers will be greatly appreciated!
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22140
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 hours 23 minutes ago at 5:25pm |
|
A functioning electric shut-off can be heard "click" when the key is turned on or 12 volts is applied to the wire. On/Off you should be able to hear something. Might take two people and the cab door needs to be shut.
|
|
Tnewsome
Bronze Level
Joined: 23 hours 14 minutes ago
Location: Georgia
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 hours 22 minutes ago at 5:26pm |
|
Can this be heard inside the cab or at the injection pump?
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22140
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 hours 16 minutes ago at 5:32pm |
|
At the pump !!
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5122
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 hours 31 minutes ago at 7:17pm |
|
Most likely the metering valve and/or plungers are stuck, sitting in today's diesel fuel is not good on injection pumps. If taking top cover off reveals it's nasty inside, you're better off just taking it off and having it properly torn down, cleaned and rebuilt. If it ends up seizing the head, it gets really expensive to rebuild and buy a head & rotor, and drive shaft and gear as well. I don't think new heads are available anymore, so good used is our only option. I like to keep people from seizing them up to start with. Good luck!
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Tnewsome
Bronze Level
Joined: 23 hours 14 minutes ago
Location: Georgia
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 hours 29 minutes ago at 7:19pm |
|
Can any diesel shop rebuild? What is your recommendation Ed?
|
|
im4racin
Orange Level
Joined: 12 Jun 2017
Location: Garrison ND
Points: 1075
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 hours 16 minutes ago at 8:32pm |
|
Send it to ed
|
|
8070nc
Orange Level Access
Joined: 21 Mar 2019
Location: North Carolina
Points: 646
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 hours 7 minutes ago at 8:41pm |
|
X2 on what imforacing said
|
|
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
|
8070nc
Orange Level Access
Joined: 21 Mar 2019
Location: North Carolina
Points: 646
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 hours 6 minutes ago at 8:42pm |
|
Im4racin. Didnt mean to mess up your name
|
|
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8678
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 hours 36 minutes ago at 9:12pm |
 Tnewsome wrote:
Can any diesel shop rebuild? What is your recommendation Ed? |
In theory yes. Seems harder to find a good shop these days. Many on this forum have done business with Ed and know him to be above board and top notch in his work. You probably have an "ED" in your neck of the woods but I have no clue how you find him. Good luck and one rebuild is all it will ever need.
|
|
Tnewsome
Bronze Level
Joined: 23 hours 14 minutes ago
Location: Georgia
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 hours 45 minutes ago at 10:03pm |
injpumpEd wrote:
Most likely the metering valve and/or plungers are stuck, sitting in today's diesel fuel is not good on injection pumps. If taking top cover off reveals it's nasty inside, you're better off just taking it off and having it properly torn down, cleaned and rebuilt. If it ends up seizing the head, it gets really expensive to rebuild and buy a head & rotor, and drive shaft and gear as well. I don't think new heads are available anymore, so good used is our only option. I like to keep people from seizing them up to start with. Good luck! |
Ed, would this be something I could send to you for rebuild? Let me know information on this. Thanks
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5122
|
Post Options
Thanks(0)
Quote Reply
Posted: 6 hours 25 minutes ago at 8:23am |
|
Yes, I get pumps shipped to me every week from all over the country. I'd avoid the post office, I prefer ups. As mentioned above, I've done work for a lot of members on this page. I work on all color tractor fuel injection systems, but am an AC guy myself, having a few orange tractors lol! If want to send to me, pm me and we can communicate that way, or can call/text my cell. 815-303-3492. If I don't answer, make sure to leave a message, I am very busy, and also get a lot of junk calls.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
