| Author |
 Topic Search  Topic Options
|
mruhlig77 
Orange Level
Joined: 19 Aug 2014
Location: central Indiana
Points: 578
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: casting clock date codes
Posted: 16 Aug 2024 at 10:01am |
|
How to read...clockwise or counter clockwise....is the top dot one or zero...thanks for the help...looking at a D-14
|
 |
|
Sponsored Links
|
|
|
mruhlig77
Orange Level
Joined: 19 Aug 2014
Location: central Indiana
Points: 578
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2024 at 4:39am |
surely you have seen the clock stamping under the right fender on the axle and other places on your D. series....Mark
|
|
ecosse23
Bronze Level
Joined: 12 Mar 2024
Location: Scotland
Points: 10
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2024 at 11:32am |
|
I believe the "clock" is read clockwise, and it reads from 1 to 12, with the "hand" or arrow pointing to the month of production. Similar notation is still used in plastic mouldings for things like TV's, computers and so forth.
|
|
mruhlig77
Orange Level
Joined: 19 Aug 2014
Location: central Indiana
Points: 578
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2024 at 4:12pm |
|
Thank you so much...I thought it was months...Is the letter codes like "J" year...
|
|
mruhlig77
Orange Level
Joined: 19 Aug 2014
Location: central Indiana
Points: 578
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2024 at 7:27am |
I think there is more to learn here...
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 22472
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2024 at 8:12am |
|
Also the marking indicates the production date or a reference code, where the numbers represent specific details like the month and year of production
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Allis dave
Orange Level
Joined: 10 May 2012
Location: Northern IN
Points: 2917
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2024 at 10:19am |
|
Google How to read Casting Codes
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20525
|
Post Options
Thanks(1)
Quote Reply
Posted: 22 Aug 2024 at 11:59am |
|
Let's use a 1937 "WC" transmission case actual date code on the right side. The code may read 12-10-36, which is the date the transmission case pour. But, your serial number of the chassis may indicate the tractor was a Spring build of 1937. Some will try and argue the tractor was built in 1936 because of that date on the transmission case. The reality is castings for engine blocks, transmission or rear end cases had to have a "cure" time of so many days or weeks before it could be machined and made a finished product. To not give the cure time would give you a casting that may change size and shape when put into service.
|
|
ecosse23
Bronze Level
Joined: 12 Mar 2024
Location: Scotland
Points: 10
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Aug 2024 at 10:32am |
Thanks, I learned a lot from reading through the replies. There's another thread here that may be of interest to the OP -
|
|
