| Author |
 Topic Search  Topic Options
|
waw1962 
Bronze Level
Joined: 11 May 2024
Location: PA
Points: 29
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D17 valve adjustment
Posted: 15 Jul 2024 at 10:38am |
|
The shop manual for the D17 series IV states to set valves 1,2,4, and 6 when TDC, then 3,5,7 and 8 at 90 degrees rotation of the crankshaft. Others have stated to set them in firing order, 1,2,4 and 3. Which is correct? Thanks.
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20543
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jul 2024 at 11:23am |
|
Either way works. Set ALL at .015" COLD which that book will not tell you.
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8244
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Jul 2024 at 7:10pm |
 waw1962 wrote:
The shop manual for the D17 series IV states to set valves 1,2,4, and 6 when TDC, then 3,5,7 and 8 at 90 degrees rotation of the crankshaft. Others have stated to set them in firing order, 1,2,4 and 3. Which is correct? Thanks. |
90 degrees doesn't sound right....you better just do each cyl on TDC
|
|
HudCo
Orange Level
Joined: 29 Jan 2013
Location: Plymouth Utah
Points: 3553
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Jul 2024 at 11:26pm |
|
one full rotation of the crankshaft. two full turns on the crank = one full turn of the cam
|
|
Allis dave
Orange Level
Joined: 10 May 2012
Location: Northern IN
Points: 2918
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jul 2024 at 6:49am |
|
I haven't done many, but when I set them I just turn it over a few times watching and catch each valve when it's all the way closed. I don't worry about TDC and the firing order. These are pretty easy to do that way becasue duration is so short. They are fully closed most of the time.
|
|
nella(Pa)
Orange Level Access
Joined: 11 Sep 2009
Location: Allentown, Pa.
Points: 3105
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jul 2024 at 7:01am |
SteveM C/IL wrote:
waw1962 wrote:
The shop manual for the D17 series IV states to set valves 1,2,4, and 6 when TDC, then 3,5,7 and 8 at 90 degrees rotation of the crankshaft. Others have stated to set them in firing order, 1,2,4 and 3. Which is correct? Thanks. |
90 degrees doesn't sound right....you better just do each cyl on TDC |
Take out spark plugs! TDC on compression stroke.
|
|
Macon Rounds
Orange Level
Joined: 18 Feb 2010
Location: Pittsburgh Pa
Points: 2147
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jul 2024 at 11:08pm |
|
Yep
Intake valve closes you are good to check valve clearance on both...
|
|
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate
|
|
Jim.ME
Orange Level
Joined: 19 Nov 2016
Location: Maine
Points: 952
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Jul 2024 at 9:15am |
|
4 cylinder overhead valve with the rocker cover off, it is pretty simple to watch the companion cylinder for the valves to be "on the rock" (exhaust valve closing and intake opening), to be in the correct place to set the valves on its cylinder with both valves closed, ready to fire. 1 and 4 are companions and 2 and 3 are companions.
Edited by Jim.ME - 18 Jul 2024 at 9:16am
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Jul 2024 at 9:27am |
Racer's set them the EOIC method, do each cylinder one at a time, as soon as the exhaust opens set the intake, as soon as the intake closes set the exhaust.
I have used it for years.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
