| Author |
 Topic Search  Topic Options
|
nickia 
Orange Level
Joined: 11 Sep 2009
Location: alden iowa
Points: 785
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: cylinder hone grit
Posted: 30 Apr 2024 at 9:40pm |
|
I finally got dads old D-17 gas freed up. The head is off and want to clean up the cylinder that was stuck. What grit of stone are people using to clean these up? I know it will probably use a little oil but dad is 84 and getting out of the hospital and will not get worked very hard at all just plan on using it on a rake. Kind of a surprise for him as its been sitting for the past 5 yrs
|
 |
|
Sponsored Links
|
|
|
nickia
Orange Level
Joined: 11 Sep 2009
Location: alden iowa
Points: 785
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2024 at 9:42pm |
I was thinking 180? Rabbit t**d hone? Any thoughts
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 81384
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2024 at 9:48pm |
|
YEP... thats what i would do in your case... Could be 240... but the 180 might clean up more of the "damage"..
|
|
Like them all, but love the "B"s.
|
|
nickia
Orange Level
Joined: 11 Sep 2009
Location: alden iowa
Points: 785
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2024 at 9:55pm |
thank you ive used the rabbit t**d hones before and the work rather well just couldnt remember what the final cross hash marks should be
|
|
HudCo
Orange Level
Joined: 29 Jan 2013
Location: Plymouth Utah
Points: 3554
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2024 at 10:27pm |
|
clean al then rust and crud out first or you will fill the hone up and it will hone the clean spots and not the dirty spots
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 909
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 May 2024 at 1:31am |
|
Do you know anyone near you with a sandblast cabinet ? use it first and only to remove heavy scale, it will save time and the hone.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4762
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 May 2024 at 7:50am |
If it's just 1 cylinder, you might just replace that 1 sleeve with a good used 1. I personally would use a flat stone hone because it will only hone the high spots, not make the low spots lower.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
