| Author |
 Topic Search  Topic Options
|
FarmerChuck 
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Nice WM Dozer
Posted: 28 Mar 2024 at 2:27pm |
New to forum. Bought what looks like a lightly used, well cared for mostly original 1940 WM Dozer at estate auction. Complete but for side curtains and generator. Light duty blade with angle and tilt. “Cargo Winch” made by Pacific Car & Foundry, Renton WA.
Have not tried to start, but prep to do so going well. Looking forward to this new project! And help from Unofficial Allis members.
Having trouble posting pics. Hope to get some added soon. following link has Auction photos if you are able to access it.
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
 |
|
Sponsored Links
|
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 51703
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2024 at 4:15pm |
Some serious wide track pads on that one! Also, plate bolted behind carb... Sign of rod release? Hope its repaired right... 
|
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Mar 2024 at 9:00pm |
|
Dave 75 % are cracked there ,its water jacket
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
FarmerChuck
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Mar 2024 at 11:26pm |
Dave: Wide pads, yes. I haven't measured them but assume its the factory wide version. Previous owner welded about 1/2 inch extensions on each pad bar, inch or two narrower than the factory pads. For better traction I assume since the pads (and rest of track) are not greatly worn. Good welds, nicely done mod. Back when time and welding skill was more "abundant/affordable"!
Fred, thanks for the encouraging info. I am pretty sure the patch is freeze damage. No sign of leaking, internal or external. Oil looks great. Engine turns over smoothly and easily (plugs out). And I have seen pics with repair in that place on block. And we have/have had several engines on the farm with brazing or other freeze repair that worked fine. Hope springs eternal, as the saying goes!
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
|
ac fleet
Orange Level
Joined: 12 Jan 2014
Location: Arrowsmith, ILL
Points: 2319
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2024 at 10:35am |
|
I had a WS at one time, --- WIDE tracks on the sucker and big old doder blade on it.
|
|
http://machinebuildersnetwork.com/
|
|
FarmerChuck
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Apr 2024 at 6:50pm |
AC Fleet, you do much work on or with the WM you had? Interested in Plusses minuses, etc. I hope to get it running and serviced (all by me) and use in some low key juniper hobby logging on (4,000 acre) family ranch in Central OR. My brother has a very nice Woodmiser portable bandsaw mill set up at the ranch and is learning to use it. Of course we are working with Juniper (and some pine, piece of cake) so good luck!! Had to set aside work on my WD so no update at this time. Haven't identified make of blade. Any idea who might have made it? My guess is a Pacific Northwest Machine, but no real info to support that. FYI for whatever reason I struggle to edit typing here with my MacBook Air. Weird. so Pls tolerate misspelling and other "stuff".
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
|
Ray54
Orange Level Access
Joined: 22 Nov 2009
Location: Paso Robles, Ca
Points: 4544
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2024 at 11:54am |
Maybe visit the Brooks Oregon antique tractor show, 2 weekends in June I think. They started the Antique Caterpillar club back in the 90's. But as good a place as any find experts 0n makes of dozer blades.
The fact that the arms the rams are attacked to is cut steel plate rather than big cast pieces, says 1950's to me. If this is true the blade was not put on your tractor as new. But all more guessing on my part.
|
|
FarmerChuck
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2024 at 2:16pm |
|
Good suggestion: Antique Power Land Annual Event Brooks OR . Last weekend July, first weekend Aug. will plan to attend. Thanks.
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
|
FarmerChuck
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Sep 2024 at 4:22pm |
|
Nice WM Dozer Update. Ser No. WM9959 (1940). Cleaned/serviced air cleaner. Dismantled, Cleaned carb, fuel tank and sediment bulb. Added in-line filter. Starts ok, but won't run unless choke mostly closed and even then no power or decent RPM. adjusting idle and main jets does not seem to make difference. governor and linkage seem to be ok. Good news: clutch, transmission, steering, brakes, winch work. Guessing too lean due to leaking carb gaskets or intake gasket.
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
|
Tad Wicks
Orange Level
Joined: 27 Mar 2011
Location: Shandon, CA
Points: 2165
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Sep 2024 at 5:51pm |
|
The exhaust mainfold has a verticle tube that runs through it for pre-heating kerosene from the carb, that tube rots away and the engine cannot make vacuum, very common, easy fix. Easy way to tell is to have somebody pull the engine over and put your hand over the carb inlet you will know if it has vacuum or not.
|
|
FarmerChuck
Bronze Level
Joined: 22 Mar 2024
Location: Oregon
Points: 14
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Sep 2024 at 9:10pm |
|
Tad Wicks: Excellent, thank you. Have duel fuel tank, but appears never plumbed for duel fuel. Will look at exhaust manifold and do carb test you suggest. Best wishes for Labor Day 2024.
|
|
Many Projects, too little time! AC Model M dozer with winch, MF40, MF35 Utility, IH 606, Fordson Super Dexta, Fordson Super Major, Pettibone Super 8
|
|
