| Author |
 Topic Search  Topic Options
|
lost in h3 
Bronze Level
Joined: 06 May 2023
Location: missouri
Points: 75
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: h3 engine
Posted: 09 May 2023 at 1:31pm |
|
My h3 with early serial number appears to have a 160 engine instead of the 149. Did they put a160ci engine in h3 or is this a transplant
|
 |
|
Sponsored Links
|
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7338
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2023 at 4:06pm |
|
Later H3s used the 160, but it's basically the same as the 149 engine. Over 60 years, a lot can happen to a crawler or tractor. An engine transplant like this would not be unusual. The D15 Series 2 tractor and some off road forklifts used the 160 engine.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
lost in h3
Bronze Level
Joined: 06 May 2023
Location: missouri
Points: 75
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2023 at 4:57pm |
|
Thank You
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5399
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2023 at 5:16am |
Link to website Tractordata for H3 Info: including Serial Nos. https://www.tractordata.com/farm-tractors/007/9/8/7981-allis-chalmers-h3.htmlThe 160 cu.in. Engine started in the D-15 in 1963. G
|
|
orangeman
Orange Level
Joined: 12 Sep 2009
Points: 1764
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 May 2023 at 7:00pm |
H-3 Crawler Serial Number from start of production to mid 1962 utilized a G-149 engine. After that the G-160 was used in the H-3.
Orangeman
|
|
DonBC
Orange Level Access
Joined: 12 Sep 2009
Location: Courtenay, BC,
Points: 913
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2023 at 2:11pm |
|
Decades ago I had a H3 loader/backhoe. I was developing a small downhill ski area that would require a snowmaking system thus the need for a backhoe and slopes that required a crawler. There was a JD dozer/backhoe available at the same time but the AC was about 1/2 the price. The AC needed the tracks rebuilt but would be still less than the JD and would be confident that with rebuilt tracks I shouldn't have problems with losing a track on the slopes. The hoe was mounted in such a way that you could drop the hoe or reattach it in about 10 minutes so that you were not carrying the hoe around when it was not needed. Never ever had engine problems.
|
|
Jack of all trades, master of none
|
|
Ian Beale
Orange Level
Joined: 03 Oct 2011
Location: New South Wales
Points: 973
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 May 2023 at 4:40pm |
|
The Red Power thread is reporting "contact"
|
|
lost in h3
Bronze Level
Joined: 06 May 2023
Location: missouri
Points: 75
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 May 2023 at 9:11pm |
|
I have no idea what red power is or contact.
|
|
Codger
Orange Level
Joined: 23 Dec 2020
Location: Utopia
Points: 2041
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 May 2023 at 9:26pm |
 lost in h3 wrote:
I have no idea what red power is or contact. |
Red Power is another website like this one for IH tractors. Many of the same issues with communication mimic your problem and they are getting resolution as far as communication.
|
|
That's All Folks!
|
|
Ian Beale
Orange Level
Joined: 03 Oct 2011
Location: New South Wales
Points: 973
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 May 2023 at 4:36am |
|
|
|
Codger
Orange Level
Joined: 23 Dec 2020
Location: Utopia
Points: 2041
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 May 2023 at 7:15am |
With many of these internet vendors, they do not have stock on anything at all. They are in an office cubical and only route orders to several places sourcing parts for an order from a database. It is why there can be such problems when errors occur as there can be several sub vendors to the original order. No real way to go to a single source solution especially when an order is placed incorrect. Sometimes it works out, sometimes not.
The "lowest price" shopping point is not always the best approach IMO.
|
|
That's All Folks!
|
|
