| Author |
 Topic Search  Topic Options
|
NEVER green 
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Copper head gasket sealer
Posted: 26 Jan 2022 at 5:39pm |
What do you guys use for copper head gasket sealer? I used Permatex copper sealer and it was gone, except for hints of it directly under head bolts where the most squish was.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
 |
|
Sponsored Links
|
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4741
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2022 at 6:27pm |
|
The engines that I've had copper head gaskets on, I've used O-rings to seal the water and oil passages and fire rings on top of the sleeves. Nothing on the copper gasket itself.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Jan 2022 at 7:16pm |
 PaulB wrote:
The engines that I've had copper head gaskets on, I've used O-rings to seal the water and oil passages and fire rings on top of the sleeves. Nothing on the copper gasket itself. |
Yep, fire rings on sleeves, since there are no grooves for o-rings, dont they get smashed down to nothing?
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
bsallis180
Silver Level
Joined: 29 Jul 2013
Location: Pennsylvania
Points: 209
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2022 at 4:28am |
|
I have used coper coat at the most and that’s it. Chances of it seeping a liquid are high
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4741
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2022 at 6:11am |
|
The holes in my copper gaskets are large enough that the O-ring set inside of the gasket and when using a .090 gasket with .125 O-rings they squash down to .090
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20524
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2022 at 6:35am |
|
Hylomar rubbed all over the copper gasket on both sides is about all you can do.
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2022 at 8:38am |
PaulB wrote:
The holes in my copper gaskets are large enough that the O-ring set inside of the gasket and when using a .090 gasket with .125 O-rings they squash down to .090 |
Yep duh, I guess I had it in my head about the pushrod holes, close to the edge of block, hate leaks.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2022 at 8:39am |
bsallis180 wrote:
I have used coper coat at the most and that’s it. Chances of it seeping a liquid are high |
Sigh, hate leaks.
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
d17brown
Orange Level
Joined: 11 Sep 2009
Location: farley iowa
Points: 1689
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Feb 2022 at 7:23pm |
|
3m Black urethane winsheild sealer
|
|
phil
|
|
NEVER green
Orange Level Access
Joined: 28 Feb 2013
Location: MN.
Points: 7498
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Feb 2022 at 8:59am |
d17brown wrote:
3m Black urethane winsheild sealer |
Have you used this, if so do you have to pry head off because its good and sticky???
|
|
2-8050 1-7080 6080 D-19 modelE & A 7040 R50
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2022 at 7:39pm |
|
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2022 at 7:40pm |
|
I TURN o ring right on top. .015
|
|
OldAC
Bronze Level
Joined: 01 Feb 2018
Location: Rural Michigan
Points: 179
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2022 at 8:02am |
|
I've always done the old trick of aluminum paint on headgaskets. I honestly think it prevents leakage better then copper coat - taken apart many things with copper coat that weeped - clean it up and use aluminum engine paint on the used gasket, put it back together and no issues.
|
|
