| Author |
 Topic Search  Topic Options
|
DSeries4 
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7438
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Spray chrome
Posted: 29 Jan 2022 at 9:18am |
Has anyone tried having this done rather than chrome plating? The chrome pieces on the B110 I am restoring are covered in surface rust, so I have been leaning towards spray chrome as a more affordable alternative. However I have heard that it can flake off pretty easily and does not have the same mirror finish as chrome plating.
What are your experiences?
Many thanks!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
 |
|
Sponsored Links
|
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8495
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 9:28am |
|
Polish and wax would be better than fake chrome. You know the only real answer i$ to get it rechromed
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 3772
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 10:04am |
 SteveM C/IL wrote:
Polish and wax would be better than fake chrome. You know the only real answer i$ to get it rechromed |
X2. I think spray chrome is just extra bright silver paint. Having said that, I cleaned up the chrome stadium light bar on the 7045. The corrosion was worse on the top side so after cleaning, polish and wax, I sprayed the top side with the "chrome" feathering to the real chrome. Looks good from the ground
|
|
dee_veloper
Orange Level
Joined: 12 Apr 2021
Location: USA
Points: 1168
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 1:46pm |
|
If it isn't too terribly rusted, you can polish it up with light oil and 1500 grit sandpaper. I did that on my B110 and it turned out very nice.
|
|
Don't confuse my personality with my attitude.
My personality is who I am. My attitude depends on who you are.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4933
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 3:29pm |
|
I've seen many things done with a "chrome" powdercoat. Like all powdercoat, it looks good to begin with and over time if it gets chipped or has a defect anywhere it will flake off. With most anything there is no substitute for doing a job right.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24352
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 4:01pm |
Have you checked local motorcycle places for chroming ? Real stuff is 'triple plated' , copper-nickel-chrome.... $$$ Prep is 99.44% of the job. Rest is 'easy'....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7438
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2022 at 7:58pm |
It would take a ton of work to get any shine out of this grille. The
support for the arm rests is worse. Thinking about it over the day,
re-chroming would be the way to go. Could also get the D21 grille
polished at the same time!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
