| Author |
 Topic Search  Topic Options
|
LouSWPA 
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: OK, Ford guys....help!
Posted: 12 Jun 2020 at 6:19pm |
|
2005 F250, trying to take the tail gate off. remove support cables, lower gate about 1/2 way, lift right end out, so far so good. slide gate to right to remove....I said slide gate to right! nothing doing! what am I missing? does it need to be in a specific position to slide out? none in the past have, but, doesn't matter, I have tried every conceivable position,from full up to full down. It goes up and down smooth, but seem REAL solid left/right!
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
 |
|
Sponsored Links
|
|
|
JoeM(GA)
Orange Level
Joined: 12 Sep 2009
Location: Cumming,GA
Points: 4814
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Jun 2020 at 6:27pm |
They started selling spacers that clamp into that space back when tailgates got so expensive and people were stealing them. The one on my F350 has two half’s and a little hard to get to Allen screw to hold it together. You must remove it to shift the gate over to remove. I’ll bet yours has one too Something like this- https://gatecuffs.com/
Edited by JoeM(GA) - 12 Jun 2020 at 6:30pm
|
|
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 87626
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Jun 2020 at 7:19pm |
|
that anti lock clip keeps you from lifting the RIGHT side out of the track.. I think Lou has that arready off... Your right Lou, it SHOULD just slide an inch to the right and pop out of the socket...Dont know how you would put a retainer clip on that side.. Normally it is just a short tube inside another tube.. a inch long
|
|
Like them all, but love the "B"s.
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Jun 2020 at 7:30pm |
|
Right, that side (right) is lifting out OK, just wont slide sideways. I even put a 4x4 on it and gave it a 'nudge' with a 3 pounder. It laughed at me! felt real solid
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
shameless dude
Orange Level
Joined: 10 Apr 2017
Location: east NE
Points: 13607
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2020 at 12:22am |
|
tannerite???
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 5088
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2020 at 6:58am |
Torch??? well it is only a Ford  Maybe a log chain and an Oak tree 
Edited by PaulB - 14 Jun 2020 at 3:52pm
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
shameless dude
Orange Level
Joined: 10 Apr 2017
Location: east NE
Points: 13607
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2020 at 8:15am |
|
**high fives Paul!!!
|
|
Bob D. (La)
Orange Level Access
Joined: 12 Sep 2009
Location: Louisiana
Points: 25529
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2020 at 3:43pm |
|
Lou. Just gits a bigger hammer. LOL
|
|
When you find yourself in a hole,PUT DOWN THE SHOVEL!!!
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2020 at 8:34pm |
 Bob D. (La) wrote:
Lou. Just gits a bigger hammer. LOL |
Well Bob, that is usually my first inclination! I polled the crew here just so I wasn't missing something, like maybe it had to be in a certain position to remove, like the right side, before I went postal on it. I got it out, but not without a significant fight! The open end of the 'pin', the part on the bed had a slight bell, or widening diameter! The 'socket' or the part on the gate had a plastic bushing. I suspect the slight wider diameter in the pin wore a groove on the plastic bushing. Now, I wonder how big the fight will be when it comes time to reinstall the gate
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
shameless dude
Orange Level
Joined: 10 Apr 2017
Location: east NE
Points: 13607
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 1:31am |
|
if yer gonna puts it back on...why did ya takes it off? is it bent?
|
|
chaskaduo
Orange Level
Joined: 26 Nov 2016
Location: Twin Cities
Points: 5200
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 8:55am |
GOOD place for plastic. 
|
|
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24655
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 9:26am |
A friend had a brand new 99 that he babied and we could NOT get his tailgate off, no way, no how... he'd never taken it off in 15 years...
What happens is the left side 'hinge' piece on the tailgate rusts and expands and tightens the plastic really,really tight into the box part of the hinge. If you get real lucky a lot of super thin 'oil', several times a day for a week, might, MIGHT free up the hinge, maybe,
Now when (if) you get it off.. clean up everything, add a lot of never-sieze, and then once a month or so REMOVE the tailgate and regrease the hinge...
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 5088
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 11:48am |
jaybmiller wrote:
A friend had a brand new 99 that he babied and we could NOT get his tailgate off, no way, no how... he'd never taken it off in 15 years...
What happens is the left side 'hinge' piece on the tailgate rusts and expands and tightens the plastic really,really tight into the box part of the hinge. If you get real lucky a lot of super thin 'oil', several times a day for a week, might, MIGHT free up the hinge, maybe,
Now when (if) you get it off.. clean up everything, add a lot of never-sieze, and then once a month or so REMOVE the tailgate and regrease the hinge...
|
Soo.... Ford has a better IDEA??? 
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24655
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 2:24pm |
naw, some 'engineer' thought ( didn't KNOW) it was a better idea... as it was cheape to make, the bean counters approved it and it gave the 2nd cousin of a mgr a job to make the plastic bushings...
it'd be interesting to know how many pickup owners here ACTUALLY have taken their tailegates off.....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Ray54
Orange Level Access
Joined: 22 Nov 2009
Location: Paso Robles, Ca
Points: 4725
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 2:57pm |
 Unless I am dreaming it,think I saw a ad by Ford the new tailgate split in the middle to open like barn doors as well as normal way. That should be fun to keep from getting bent.
Edited by Ray54 - 14 Jun 2020 at 2:58pm
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 5:47pm |
|
pulling the bed off for repair or replacement....probably replacement
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24655
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 5:51pm |
grind the heads off the 8 Torx bolts, remove 2 screws from filler pipe,undo the wiring connectors, lift box, toss 4b4 under each corner ,then use forklift to remove.... I was going to do that to get to leaky gastank...was.... mechanic said he'd do the repair on the hoist , so HE can get dirty..... I KNOW the bed cross rails will be toast after 20+ years..don't need anymore krappy jobs..
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2020 at 5:52pm |
|
actually Jay, this tailgate is pristine, bed is rotting off, but the tailgate is near prefect. I think the plastic got a groove or ridge worn in it and was sticking
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12157
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2020 at 8:16am |
PaulB wrote:
jaybmiller wrote:
A friend had a brand new 99 that he babied and we could NOT get his tailgate off, no way, no how... he'd never taken it off in 15 years...
What happens is the left side 'hinge' piece on the tailgate rusts and expands and tightens the plastic really,really tight into the box part of the hinge. If you get real lucky a lot of super thin 'oil', several times a day for a week, might, MIGHT free up the hinge, maybe,
Now when (if) you get it off.. clean up everything, add a lot of never-sieze, and then once a month or so REMOVE the tailgate and regrease the hinge...
|
Soo.... Ford has a better IDEA??? |
You wanna see a picture of the swiss cheese tailgate, and tinfoil bumper on a GMC???
|
|
LouSWPA
Orange Level Access
Joined: 11 Sep 2009
Location: Clinton, Pa
Points: 25077
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2020 at 9:43am |
|
ABD! well, more accurately, Anything But Ram, ABR
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27
|
|
