Kawasaki engines links,,?

  OK,,so,,I been scourin the net for the longest and ain't fount what I'm lookin for,,,I KNOW ole JC, and Chask are the resident experts on finding them links that get you right to what you are lookin for,,,,

 My small 800 watt generator don't want to start after settin for 2-3 years inside the garage.  The spark is erratic at best so I been lookin for a replacement coil but no friggin luck yet. I did clean the flywheel and coil contacts and will sometimes fire but not regular. The generator is an AG-Tronics model PM800 with a Kawasaki engine model KF76-F and Spec number 314577A. Any help out there??,,,,and,,,and,,don't tell me to throw it away and buy another,,,,,

AG-Tronic / Powermate Generators

Apparently there are a lot of the old AG-Tronic gensets out there but the AG-Tronic company doesn't exist anymore. The AG-Tronic and Powermate generators are now supported by PRAMAC America, LLC, and parts for most of the AG-Tronic and Powermate generators are available from them.

They can be reached at either http://www.powermate.com/ or https://www.pramac.com/ and you can download manuals and parts lists for just about all of their units.

They have a contact us page that you could ask them directly for info or help.

 

 

I'll keep pokin around.

 Well,,I'ma try this one more time,,,I been finaglin with Win10 on transferrin pics but ,,,,aw chit it did not resize,,,!!!!WTF,,??

 well,,at least you can see what the friggin coil looks like,,,,,

 Strange lookin one huh,,???

 

chaskaduo wrote: Would beat the snot out of $85 for a coil that might not work or be needed.

 Well,,Chask,,I knew either you or ole JC was gonna find what I ain't been able to get fount,,,,, That sure does look like the one I need but,,,but now after seein the hellacious price for thet little bitty coil,,,I may just box it all up and send it to ole Shameless,,se if he can use it for parts,,,,

 BUT,,,,,WAIT,!!!,,,I'm likin what ole Hudco is talkin bout ,,,

 Hey hud,,,does this thing take the place of the coil or ,,??

 Tell Me more,,Guy,,,tell me more,,,,

 Well,,,I'm thankin ole Hudco for his input but am still tryin to decide HOW and Where you install the electronic chingas,,,,

 I went ahead and pulled the flywheel and CHIT-FIRE if it didn't crack when I hooked the pullers of it,,,!!!,   No preblemo as I done great when weldin the big old hole in the block of the little ferguson,,,,!!! The reason why this little engine dod not have a constant spark is the loins were complete covered with,,,,OIL,,,!!  But where did all the oil come from,,??   The Crank shaft seal looked good and had not been leakin from there,,,???? I'ma gonna clean all the oil this mornin,,,then weld up the flywheel and give it another GO,,!! Hopin it will fire up,,,,!!!