![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
180 allis Chalmers questions |
Post Reply ![]() |
Author | |
keith wd ![]() Silver Level ![]() Joined: 17 Nov 2015 Location: michigan Points: 56 |
![]() ![]() ![]() ![]() ![]() Posted: 19 Feb 2017 at 1:33pm |
Working on putting 180 back together and trying to get the troque tube back to the transmission and trying to get the bushing to slide back into the hi and lo and the tractor will not go back together all the way what could I be doing wrong the bushing will not go into the hi and lo even with force?
|
|
![]() |
|
Sponsored Links | |
![]() |
|
SteveM C/IL ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8566 |
![]() ![]() ![]() ![]() ![]() |
was this bushing replaced?seems I remember about that having to be "sized"after installation
|
|
![]() |
|
keith wd ![]() Silver Level ![]() Joined: 17 Nov 2015 Location: michigan Points: 56 |
![]() ![]() ![]() ![]() ![]() |
Yes was replaced how did you size it?
|
|
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
It is a bearing so no resizing. Make sure PTO is not stopping it. Make sure piglet bearing did not come apart. How much does it lack going togather? MACK
|
|
![]() |
|
Lonn ![]() Orange Level ![]() ![]() Joined: 16 Sep 2009 Location: Назарово,Russia Points: 29792 |
![]() ![]() ![]() ![]() ![]() |
piglet bearing? Never heard that term before. Is that the needle bearing?
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink I am a Russian Bot |
|
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
Big fingers, little keys= piglet PILOT. MACK
|
|
![]() |
|
Lonn ![]() Orange Level ![]() ![]() Joined: 16 Sep 2009 Location: Назарово,Russia Points: 29792 |
![]() ![]() ![]() ![]() ![]() |
Ah, I thought I was out of the loop on something LOL
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink I am a Russian Bot |
|
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 21723 |
![]() ![]() ![]() ![]() ![]() |
Never replace the brass bushing in the front end of the power director clutch. It has to be machined to a specific size after installation.
|
|
![]() |
|
DougG ![]() Orange Level ![]() Joined: 20 Sep 2009 Location: Mo Points: 8308 |
![]() ![]() ![]() ![]() ![]() |
Get some long bolts and help pull it together,, gently, if there is alot of resistance stop and check things out
|
|
![]() |
|
WF owner ![]() Orange Level ![]() Joined: 12 May 2013 Location: Bombay NY Points: 4979 |
![]() ![]() ![]() ![]() ![]() |
I, personally, would never pull one together with bolts. I have used longer bolts as pilot bolts, to hold everything straight, but I wouldn't pull it together.
|
|
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
Tie down straps work pretty good pulling one togather. Hook battery up and bump it once in a while. MACK
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |