HD16DP starting

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I recently bought a HD16DP (sn 9036 year 1969) from another farm nearby. One of the things we covered was that it probably needed batteries as he said  it would turnover real slow at times if it hadn't been started in a awhile. Day I got it started like a champ and off I went on my first ever dozer thinking about the 150acres I'd like to slowly cleanup from clear cut
Couple days later  went to start it and got a really faint solenoid click and a couple cylinder fires and that was it. So off I went to get new batteries, but after that I'm still not getting even solenoid action.
Now its been ages since I worked on anything this large(20 years in the Coast Guard)
I did a battery check and I'm getting 1100cca (ATD analyzer) testing each batter separately.
Testing at the starter I'm only seeing about 250cca on the tester but seems that should still be plenty to hear the solenoid kick in?

Any help would be appreciated. I see a new started isn't all that exspensive but putting in on looks like fun

thanks
MIke

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
FoxAndQuail Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 17 Dec 2016 Location: Southern Virgin Points: 5	Post Options Post Reply Quote FoxAndQuail Report Post Thanks(0) Quote Reply Topic: HD16DP starting Posted: 17 Dec 2016 at 4:27pm
	I recently bought a HD16DP (sn 9036 year 1969) from another farm nearby. One of the things we covered was that it probably needed batteries as he said it would turnover real slow at times if it hadn't been started in a awhile. Day I got it started like a champ and off I went on my first ever dozer thinking about the 150acres I'd like to slowly cleanup from clear cut Couple days later went to start it and got a really faint solenoid click and a couple cylinder fires and that was it. So off I went to get new batteries, but after that I'm still not getting even solenoid action. Now its been ages since I worked on anything this large(20 years in the Coast Guard) I did a battery check and I'm getting 1100cca (ATD analyzer) testing each batter separately. Testing at the starter I'm only seeing about 250cca on the tester but seems that should still be plenty to hear the solenoid kick in? Any help would be appreciated. I see a new started isn't all that exspensive but putting in on looks like fun thanks MIke

Sponsored Links

truckerfarmer Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 26 Jan 2013 Location: Watertown, SD Points: 3216	Post Options Post Reply Quote truckerfarmer Report Post Thanks(0) Quote Reply Posted: 17 Dec 2016 at 10:24pm
	Check the cables for corrosion. Also check all the connections on the solenoid, and all the wires running to it. Edited by truckerfarmer - 17 Dec 2016 at 10:26pm
	Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it!

LeonR2013 Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 01 Jan 2013 Location: Fulton, Mo Points: 3500	Post Options Post Reply Quote LeonR2013 Report Post Thanks(0) Quote Reply Posted: 17 Dec 2016 at 11:10pm
	Cables can be bad inside the cable end or insulation. Put your tester on them and wiggle the heck out of'em.

Ian Beale Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 03 Oct 2011 Location: New South Wales Points: 973	Post Options Post Reply Quote Ian Beale Report Post Thanks(0) Quote Reply Posted: 18 Dec 2016 at 12:30am
	The auto electrician I've dealt with for 50 years says that the internal contacts of the solenoid on Delco starters can corrode with lack of use

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31058	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 18 Dec 2016 at 8:32am
	And or burn spot if used with low condition batteries scrub. Have had to remove a few contact plates and scrub them with sand paper to get them back making contact.

FoxAndQuail Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 17 Dec 2016 Location: Southern Virgin Points: 5	Post Options Post Reply Quote FoxAndQuail Report Post Thanks(0) Quote Reply Posted: 18 Dec 2016 at 9:23am
	well this morning I took a resistance on the starter posts to ground connection and getting about 3 ohms which is way too high I think. Does anyone know the proper readings by chance took a spare solenoid I had and cabled it in to similuate a starter (usingthe pull in coil) and then the starter solenoid started kicking in properly SO I'm about ready to accept that the starter itself has gone bad, it doesn't look too bad to replace it. Think if I take the side panel off it will barely slide out between the hydraulic pipes Anyone done a starter replacement on a hd16 that has some advice?

JohnCO Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992	Post Options Post Reply Quote JohnCO Report Post Thanks(0) Quote Reply Posted: 18 Dec 2016 at 11:37pm
	If you can get the starter off I'd take it to a shop to see if they can diagnose the problem. Might be better then another used starter or spending larger bills on a new one.
	"If at first you don't succeed, get a bigger hammer" Allis Express participant

hd16b Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 12 Jan 2011 Points: 88	Post Options Post Reply Quote hd16b Report Post Thanks(0) Quote Reply Posted: 19 Dec 2016 at 5:45am
	Just took mine off my 16b. Pretty straight forward, worst part is the back nut. Call if u have any questions 2529162927

DMiller Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 31058	Post Options Post Reply Quote DMiller Report Post Thanks(0) Quote Reply Posted: 19 Dec 2016 at 7:09am
	If you can find a heavy truck engine shop close by ask if they have "Space Saver" head bolts for starters. 5/8" 12 point head with shoulder on a 5/8 std thd bolt. I have had a few over the years, ended up installing my last two on my own 7G starter to eliminate trying to get the 15/16 headed piece of stuff out from the back! And I have the old half moon 'Starter' wrenches in my box!