This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
190 crooked fan belt |
Post Reply |
Author | |
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7304 |
Post Options
Thanks(0)
Posted: 30 Jun 2016 at 9:52pm |
Am I missing something here? Put the water pump and fan assembly back on the engine and set up the alternator with the new belt. The fan pulley lines up nicely with the outer pulley on the crank, but the alternator lines up with the INNER pulley on the crank. Do I have the right pulley on my alternator? The alternator came with the tractor, but I suspect it may have been changed at some point in its life. Can someone give in an idea of what the correct alternator pulley looks like?
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Sponsored Links | |
KY poorboy
Orange Level Joined: 16 Aug 2015 Location: West KY Points: 933 |
Post Options
Thanks(0)
|
Would the outside of a double pulley align with your others? Just a thought.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20191 |
Post Options
Thanks(0)
|
Pulley goes on first, then the SPACER, then the fan. Use inside groove on crank pulley.
|
|
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7304 |
Post Options
Thanks(0)
|
Thanks Doc, that makes sense. I should have looked up my old pics!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
MACK
Orange Level Joined: 17 Nov 2009 Points: 7664 |
Post Options
Thanks(0)
|
Or hub was not pressed on water pump far enough. MACK
|
|
Beirnesy
Orange Level Joined: 30 Jun 2012 Location: Mid Western Ont Points: 351 |
Post Options
Thanks(0)
|
mine is pulley, spacer, fan, and belt on inside groove.
BTW paint looks awsome, would you share with us what brand of paint you are using.
Thanks |
|
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716
|
|
SHAMELESS
Orange Level Joined: 13 Sep 2009 Location: EAST NE Points: 29486 |
Post Options
Thanks(0)
|
can shim the alternator
|
|
Stan IL&TN
Orange Level Joined: 13 Sep 2009 Location: Elvis Land Points: 6730 |
Post Options
Thanks(0)
|
Me thinks that this would not be acceptable at this juncture. |
|
1957 WD45 dad's first AC
1968 one-seventy 1956 F40 Ferguson |
|
Gerald J.
Orange Level Joined: 12 Sep 2009 Location: Hamilton Co, IA Points: 5636 |
Post Options
Thanks(0)
|
I used me vertical milling machine to cut slots in the bent steel alternator bracket to allow aligning the pulleys on my gas 4020.
Gerald J. |
|
DSeries4
Orange Level Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7304 |
Post Options
Thanks(0)
|
Has 2 coats of AGCO corporate orange on top of 2 coats of grey primer. There is going to be a lot of touch up to do once I get this engine put back together! |
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |