| Author |
 Topic Search  Topic Options
|
wildbill26 
Orange Level
Joined: 25 Sep 2010
Location: claysville,PA
Points: 534
|
 Post Options
 Thanks(1)
 Quote  Reply
 Topic: mower from b 12 to 710
Posted: 28 Jan 2014 at 9:56am |
|
this is probably a long shot but wondered if the sicklebar mower from my b 12 would work on my 710, i know it would bolt in place but since the pto set ups are some what diffrent i wondered if it work work that way. i only wanted to swap it since my 710 is a 6 speed and has more gearing options, slower, thanks bill
|
|
1950 wd wide front w loader
1940 b, 1939 m crawler
|
 |
|
Sponsored Links
|
|
|
ACmowerguy
Orange Level
Joined: 20 Apr 2010
Location: Winfield, MO
Points: 1209
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 11:58am |
|
No. The 710 will run the mower too fast and will tear it up in no time. The sickle mowers for the 700 series have a special planetary gear reduction setup to reduce the speed.
|
|
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
|
wildbill26
Orange Level
Joined: 25 Sep 2010
Location: claysville,PA
Points: 534
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 12:00pm |
|
Thank you Chris,I definitely don't want to.mess anything up
|
|
1950 wd wide front w loader
1940 b, 1939 m crawler
|
|
littlemarv
Orange Level
Joined: 10 Jun 2013
Location: Wisconsin
Points: 1829
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 3:03pm |
I took the 6 1/2" pulley off the trans and installed a 9" one and a new belt. There is room to put a 10" one on if you like. It doesn't take long to switch back and forth between the stock pulley/belt and the bigger one. A bigger pulley slows down the tractor quite a bit and may be just what you need. Sure slowed down my B-10 for tilling.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
|
Matt Tallant
Orange Level
Joined: 15 Aug 2011
Location: Virginia
Points: 674
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 3:06pm |
|
He is talking about the mower RPM not the ground speed..
|
|
wildbill26
Orange Level
Joined: 25 Sep 2010
Location: claysville,PA
Points: 534
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 5:25pm |
|
Little marv I may give that a shot, I just thought that it was a little fast for doing fence line, and the 719 had way lower gears for ground speed thanks
|
|
1950 wd wide front w loader
1940 b, 1939 m crawler
|
|
ACmowerguy
Orange Level
Joined: 20 Apr 2010
Location: Winfield, MO
Points: 1209
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 7:11pm |
|
Marv and Bill, its not the ground speed that is the problem. As Matt pointed out, it is the PTO speed. The cone clutch on your 700 series will drive the sickle bar mechanisms much faster than they were designed for. Sickle mowers are prone to damage when they are run in an overspeed condition. Most of the parts are no longer available so its not worth taking the chance with it.
|
|
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
|
wildbill26
Orange Level
Joined: 25 Sep 2010
Location: claysville,PA
Points: 534
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 7:26pm |
|
Chris, I under stood that from your first post, but the only reason I wanted to switch was because the 710 had a slower ground speed, and marvs idea with the drive pulley would slow it down ground speed wise so I wouldn't need to switch tractors
|
|
1950 wd wide front w loader
1940 b, 1939 m crawler
|
|
littlemarv
Orange Level
Joined: 10 Jun 2013
Location: Wisconsin
Points: 1829
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 8:56pm |
I'm pretty sure he meant ground speed.
I slowed down my B-10 for tilling. This summer I got a sickle mower for the WD and that tractor has the same problem. If you get the revs up a little bit to get the sickle moving fast enough, even in first gear the tractor moves too fast, unless your in a perfectly manicured flat field.
Fixing that will be way more than swapping a pulley....
My old man told me Allis's have always been fast when it comes to ground speed. I guess it even applies to garden tractors.
At any rate, I've read in several places that a sickle mower on an old Simplicity or Allis should be run at half throttle maximum.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
|
littlemarv
Orange Level
Joined: 10 Jun 2013
Location: Wisconsin
Points: 1829
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2014 at 9:00pm |
With that big pulley on the trans upping the torque, and the tiller hanging off the back, you can't ease off the clutch enough to get rolling without the front end coming off the ground. Kind of funny to see.
With a sickle hanging under the middle you probably won't have that problem.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
|
Michigan farmer
Bronze Level
Joined: 18 Jan 2014
Location: Bancroft, Mi
Points: 11
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2014 at 6:22am |
|
I just bought a sickle mower for my 616.
Came with the manual.
I will be reading it soon and will post any do's and don'ts
concerning proper operation.
|
|
ACmowerguy
Orange Level
Joined: 20 Apr 2010
Location: Winfield, MO
Points: 1209
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2014 at 9:01pm |
|
I'm sorry Marv, I overlooked the fact he still posessed the B-12. The low speed pulley looks like a good idea. I did find when using mine I had to move quickly (2nd or 3rd gear) to keep the cut grass from falling in front of the sickle.
|
|
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
|
littlemarv
Orange Level
Joined: 10 Jun 2013
Location: Wisconsin
Points: 1829
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2014 at 9:28pm |
I call that modification "poor mans Hi Low" because its a lot cheaper than coughing up $200 or more for a hi low for one of these.
I would like a sickle mower, but you can't snag one for less than 3 or 4 hundred dollars around here.
|
|
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
|
split51
Orange Level
Joined: 13 Sep 2009
Location: Guthrie, OK
Points: 713
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 Jan 2014 at 8:40pm |
|
I have a sickle mower on my HB112 and use it as much as possible, I had it on my B10 at first but, like Bill, found the ground speed too fast when I tried mowing next to trees or a fence.
|
|
1929 20-35 sn17662
B1 w/snow blade
B10 w/sickle mower
B110 w/mower deck
B110 w/tiller
B112 w/grader blade
B210 w/plo
|
|
timflury
Bronze Level
Joined: 10 Apr 2013
Location: Mukwonago, Wi.
Points: 17
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Feb 2014 at 2:53pm |
There are Simplicity Mfr. numbers for the larger diameter pulley/belt combinations. The parts are in stock at your local TSC. You can also buy an arbor and separate pulley to sreate your own and weld the two pieces together. The larger pulleys help a great deal when running the tiller. There is a caution in the manual that says not to run the engine at more than half throttle when cutting with the sickle bar. A friend of mine ran his up just briefly to show us how much the thing shakes.
|
|
When was the last time you thanked a veteran.
|
|
