| Author |
 Topic Search  Topic Options
|
pdh 
Bronze Level
Joined: 13 Sep 2009
Location: Iowa
Points: 199
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Flip Forward Seat for 100 series
Posted: 12 Aug 2024 at 11:55am |
|
Have a new to me open station 200 that will earn a living on a grain auger so will sit outside all fall. Needs a new seat anyway - and would like to replace with one which will "flip forward" on to the steering wheel so I can keep the rain and snow off. Anything out there to accomplish this?
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20528
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2024 at 1:20pm |
|
Yours must be the later model with the black seat suspension??? If you get the whole thing (orange) from a 190-190XT or early 200 you will have a different track and the seat will tilt forward.
|
|
pdh
Bronze Level
Joined: 13 Sep 2009
Location: Iowa
Points: 199
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2024 at 3:28pm |
|
Should have been more precise. 1973 serial 5### was factory cab - cab removed by prior owner. The seat suspension is orange now - but I sure don't see a hinge?
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20528
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2024 at 3:51pm |
|
BUT, if he used the cab seat suspension, he's repainted it and it doesn't have a tilt feature. Does any of the seat suspension go down and attach to the platform ?? I'd say no.
|
|
pdh
Bronze Level
Joined: 13 Sep 2009
Location: Iowa
Points: 199
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2024 at 9:56pm |
|
Correct Doc. Suspension attaches to front of fuel tank only - it does not extend to platform. I will look around for the type of suspension you suggest. Much obliged.
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 908
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Aug 2024 at 9:43pm |
A piece of 3/8" ID steel tube the width of seat base the cushion fastens to cut into 3 pieces and a piece of 3/8" rod 1" longer than the total tube you can make your seat tilt. I've done it on a late 185 and a 200. They do the same fall auger work you're doing. IF you know of an AC 100 series with the deluxe seat to go look at. Just copy how it tilts. I'm several hundred miles away from mine this week or I'd try to get you pictures.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 908
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Aug 2024 at 11:40pm |
I looked at how my AC 180 deluxe seat hinged and did the same to the 185 & 200. They seem to work fine.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
David Maddux
Orange Level
Joined: 13 Sep 2009
Points: 2524
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Aug 2024 at 1:10pm |
|
Jim Nevels has your seat, he is not able to post on here,so I will leave his phone number. 660-527-3514 or 3524
|
|
pdh
Bronze Level
Joined: 13 Sep 2009
Location: Iowa
Points: 199
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Aug 2024 at 11:58am |
|
Thanks for the lead.
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2342
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Aug 2024 at 1:01pm |
|
I have a complete seat assembly off a 190 minus the seat I'd sell in east central iowa if you're interested.
|
|
pdh
Bronze Level
Joined: 13 Sep 2009
Location: Iowa
Points: 199
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2024 at 8:31am |
|
Thanks - but I bought one already.
|
|
