Allis B - hard start when warm

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   been chaseing this for years now.  sent magneto out to be rebuilt 2 years ago, last year sent gas tank out to get sandblasted and coated.  when cold i turn gas on and choke and two cranks and it running. when warm nothing.  Now this happened b4 the mag was rebuilt so I assumed fixing the mag would fix the problem.  my current theory is the float isnt set correctly and im getting too much gas however after started it run great. there is some kinda petcock on the manifold right abouve the carb and if I open the petcock and blow into it i hear a gurglling sound??? sometimes it starts after i do that.  my hand hurts from cranking even with a glove on!!!!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
JCSinPITTS,PA Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 14 Sep 2009 Points: 229	Post Options Post Reply Quote JCSinPITTS,PA Report Post Thanks(0) Quote Reply Topic: Allis B - hard start when warm Posted: 23 May 2024 at 7:56am
	been chaseing this for years now. sent magneto out to be rebuilt 2 years ago, last year sent gas tank out to get sandblasted and coated. when cold i turn gas on and choke and two cranks and it running. when warm nothing. Now this happened b4 the mag was rebuilt so I assumed fixing the mag would fix the problem. my current theory is the float isnt set correctly and im getting too much gas however after started it run great. there is some kinda petcock on the manifold right abouve the carb and if I open the petcock and blow into it i hear a gurglling sound??? sometimes it starts after i do that. my hand hurts from cranking even with a glove on!!!!

Sponsored Links

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81384	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 23 May 2024 at 8:07am
	When its hot, your starting with NO CHOKE ? .... HAve you checked the air cleaner bowl oil ... or removed the air cleaner for cleaning ? .............. but since it starts when cold, then runs good when hot.. Just sounds like a bad air/ fuel ratio (choke ) when starting hot.
	Like them all, but love the "B"s.

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81384	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 23 May 2024 at 8:13am
	some kinda petcock on the manifold right abouve the carb and if I open the petcock and blow into it i hear a gurglling sound? When your OFF cold, do you shut the fuel supply valve off.??. Then when OFF HOT leave it open ?? Do you see any overflow of gas from the air inlet from the air cleaner ?? Maybe the gas fills the bowl and overflows into the hose and causes a RICH startup ?? The gas could be the gurgling sound you hear ?
	Like them all, but love the "B"s.

Les Kerf Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 08 May 2020 Location: Idaho Points: 792	Post Options Post Reply Quote Les Kerf Report Post Thanks(0) Quote Reply Posted: 23 May 2024 at 8:14am
	Try shutting it down by turning off the gas and letting it just run out of fuel to drain the float bowl and also cool it down a bit. Then turn on the fuel and try re-starting.

slimbo3006 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 20 Apr 2024 Location: Virginia Points: 16	Post Options Post Reply Quote slimbo3006 Report Post Thanks(0) Quote Reply Posted: 23 May 2024 at 10:12am
	Thinking outside of the fuel/air ratio... Might want to double check your ignition timing. Too much advance will lead to hard starting when hot. It will start cold and run great, just hard to start again when hot.