| Author |
 Topic Search  Topic Options
|
ClayP 
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: A/C 180 has torn hydraulic screen
Posted: 07 Sep 2023 at 7:35pm |
|
A/C 180 has torn hydraulic screen. Can it be repaired or do I have to purchase a new one? Where could I order one? 1967 model.
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20187
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 7:56pm |
|
An AGCO dealership if it is still available. This screen is important and must be in GOOD condition. Anything that gets thru it can lock up the hydraulic pump and possibly break the camshaft in the engine if it does lock up.
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 8:23pm |
|
Thank you, the hydraulic fluid had a little water in it and I decided to see if it had any sludge in the drain sump. Fairly clean but I noticed the screen was torn away from its frame. Probably should order rubber seals for return and suction tubes??
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20187
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 8:47pm |
|
I would 50+ yrs old.
|
|
Ryan Renko
Orange Level
Joined: 12 Sep 2009
Location: Edwardsville, I
Points: 2321
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 8:57pm |
|
Mine was torn and the screen pulled away from the frame in my D17 IV. Sadly it was no longer available. I used a little engineering and managed to make a new one myself but that might not be for everyone. Ryan
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20187
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 9:25pm |
|
D-17 IV not the same screen as a 180.
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 9:26pm |
|
My first thought was to repair it. I'm going to a local tractor salvage that has a 180 in it and see if I can purchase the screen if it's good.
|
|
Ryan Renko
Orange Level
Joined: 12 Sep 2009
Location: Edwardsville, I
Points: 2321
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 9:34pm |
 DrAllis wrote:
D-17 IV not the same screen as a 180. |
But it would be similar in design correct??
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 882
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Sep 2023 at 11:55pm |
Screen was available 4 year ago. These are old numbers, will need updated. #246134 gasket. #249934 screen. These are the rubber line seals used on this cover. #245846 seal #245847 seal.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20187
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 1:35am |
|
D-17 screen very fine mesh and measures 8" x 8" approximately. 180 is coarser screen and measures 3" x 7" approx. Both do the same thing but vastly different from each other,
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 3:26am |
|
Thanks for all the help. I will check out those part#'s to see if they are still available.
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 3:33am |
|
Are these AGCO part numbers?
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 882
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 3:48am |
|
Yes, The numbers I listed are from my old AC 180 & 200 parts books, AGCO has updated them but your dealer can cross them easily.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8304
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 6:38am |
|
Ad a 70 to the beginning of each number. They’re still available. Little pricey though
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8304
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 6:47am |
I just looked in 180 parts book and 70259407 is rubber seal instead of 245847.
Edited by Mikez - 08 Sep 2023 at 6:49am
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 6:47am |
|
Thanks again for all the help.
|
|
Ryan Renko
Orange Level
Joined: 12 Sep 2009
Location: Edwardsville, I
Points: 2321
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Sep 2023 at 9:21pm |
DrAllis wrote:
D-17 screen very fine mesh and measures 8" x 8" approximately. 180 is coarser screen and measures 3" x 7" approx. Both do the same thing but vastly different from each other, |
Then my idea of making a new frame and attaching the screen would definitely never work. Thank you for correcting me. Ryan
Edited by Ryan Renko - 08 Sep 2023 at 9:30pm
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Sep 2023 at 10:29am |
|
Thanks for all the help with the hydraulic screen issue. I found a screen locally that was a different style and was able to sandwich the screen between two gaskets and apply permatex to all surfaces. Does anyone know if I can find an oil pressure switch for my A/C 180 at an auto parts store. Part#? Light had been on constantly with good oil pressure. I checked with a glycerin gauge. Thanks in advance. I've named my 180 "Ol Woman ." She shares the same birth year as my wife 1967!
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8091
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Sep 2023 at 1:40pm |
|
Its the same Chevy used for the 350 back in those years
|
|
ClayP
Bronze Level
Joined: 04 Sep 2023
Location: Texas
Points: 15
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Sep 2023 at 3:27pm |
|
Thanks Doug!
|
|
