This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Other Topics > Pulling Forum
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Carberator
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
Stoges View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 27 Apr 2024
Location: Erie Pa.
Points: 38 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Stoges Quote  Post ReplyReply Direct Link To This Post Topic: Carberator
    Posted: 29 Jul 2026 at 3:05pm
I have a M-S 853 carb on E3, running rich at an idle, 10 on a AFR gauge. Carb was rebuilt by a “professional “ I have no control with the idle jet, any ideas on what’s wrong.
The load jet is fine, AFR runs 13.5 tuned on a dyno Opened to ideas. Thanks Bill
Back to Top
Sponsored Links


Back to Top
DrAllis View Drop Down
Orange Level Access
Orange Level Access


Joined: 12 Sep 2009
Points: 23480 		Post Options Post Options   Thanks (0) Thanks(0)   Quote DrAllis Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jul 2026 at 3:55pm
What does it do if you unscrew the idle mixture jet and remove it ??   All the way in is rich. All the way out/removed is letting in air. Normally 1 1/2 turns out is very close. So, if it still does it with the jet removed there must be a plugged internal passage or jet not allowing air into the idle circuit.
Back to Top
Stoges View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 27 Apr 2024
Location: Erie Pa.
Points: 38 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Stoges Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jul 2026 at 4:30pm
Closed it will die, take out makes no difference, it’s not getting air I think now. Can you get to all the passages. I have rebuilt JD, I have all carb cleaning tools just never tackled a M-S
Back to Top
DrAllis View Drop Down
Orange Level Access
Orange Level Access


Joined: 12 Sep 2009
Points: 23480 		Post Options Post Options   Thanks (0) Thanks(0)   Quote DrAllis Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jul 2026 at 6:49pm
Did it idle fine before it was worked on ??  Should be able to get to all passages and jets but when they're 60 years old what could go wrong .....
Back to Top
Stoges View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 27 Apr 2024
Location: Erie Pa.
Points: 38 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Stoges Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jul 2026 at 11:30pm
it has always idled fine but the plugs are carboned up but ran good never fouled. I put a AFR gauge on and it shows it running rich at 10 and will foul the sensor. That’s when I tried to lean it out but no response. Timed at 23 degrees by a ligh and verified with a vacuum gauge. Thanks for your help Doc, I built the motor two years ago pretty much to your guiding lines..
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.090 seconds.


Help Support the
Unofficial Allis Forum