| Author |
 Topic Search  Topic Options
|
Lonn 
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29787
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Allis 330 air planter problem
Posted: 24 May 2010 at 4:35pm |
|
Just finished planting beans this past weekend but I have a question. One unit would quit planting so I'd take a look and see beans pushing their way out the outside circumference of the seed disk. I just loosen it and empty the seed chamber and then tighten it up and go again. It didn't happen often but it was annoying. What would cause this? It only would happen to the same single unit. This is my first year using an Allis air planter. Thanks.
Edited by Lonn - 24 May 2010 at 4:36pm
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 20945
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 May 2010 at 7:45pm |
|
The seed discs are not supposed to be flat .....they are to be concave shaped, like a disc blade when loose on the row unit, the outside of the seed disc should touch the aluminum housing BEFORE the nut it fully tightened. That being said, the discs should be loosened after season or removed from the planter so they retain that "concave" profile. My guess is the discs have been left installed for the last 11 months and they have gone flat.
|
|
Lonn
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29787
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 May 2010 at 8:03am |
|
Thanks Doc, they were on tight when I bought it this spring. Lonn
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|
Kevin(Alabama)
Orange Level
Joined: 12 Sep 2009
Location: N.W. Ala.
Points: 578
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 May 2010 at 8:10am |
|
Had that problem once on my DA 385 and was also losing air pressure, and there was a washer on the inside of the seed disc, I put it on the outside of disc and solved the problem.
|
|
"I would die a thousand deaths before I would betray a friend."...Sam Davis, Nov. 27, 1863.....DEO VINDICE
|
|
tbran
Orange Level
Joined: 14 Sep 2009
Location: Paris Tn
Points: 3375
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 May 2010 at 9:33pm |
|
yes as kevin said it is a loss of air problem. Due to low fan rpm or low voltage or the fan blades coated over and not clean. Also loss of air can be due to plates getting bean hulls of dirt on outside of plate that breaks seal. We cut a V notch on the outside to serve as a scraper on all air planter plates..
|
|
