AC Improvements
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8207
Printed Date: 04 Jun 2024 at 1:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC Improvements
Posted By: Zyta
Subject: AC Improvements
Date Posted: 16 Feb 2010 at 7:55pm
|
These grease fitting should have been installed on AC tractors from factory! |
Replies:
Posted By: j.w.freck
Date Posted: 16 Feb 2010 at 8:03pm
| you are right..especially on the hand clutch |
Posted By: Zyta
Date Posted: 16 Feb 2010 at 8:16pm
|
Posted By: ToddSin NY
Date Posted: 17 Feb 2010 at 2:19am
| What you working on there Zyta? |
Posted By: Lonn
Date Posted: 17 Feb 2010 at 7:14am
|
Put a zerk on the steering support near the oil filter. A 90 degree on the block side will go unnoticed. If you have a wide front then the pivots need one each too. I didn't put any on the lift arm housing as I thought I wouldn't use the lift arms so much. I might add that some day but I might put 90 degree ones underneath to hide them. Too fussy I guess. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Zyta
Date Posted: 17 Feb 2010 at 7:27am
| Good Idea's! will look at that..what are we working on? last year I fitted and tested this 45 with a G262 Gleaner six cylinder. This winter I took her all apart to replace a bearing and gaskets using the Right Stuff gasket maker and looked after a few other adjustments. I love these old girls when they don't leak oil all over the floor. Tin work is all painted soon be ready to paint the drive train. I will post pictures once I get the 262 back in her in the next couple weeks. |