Construction and other equipment - Snow Plows

Print Page | Close Window

Snow Plows - skid steer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144686
Printed Date: 14 May 2024 at 10:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Snow Plows - skid steer

Posted By: Coke-in-MN
Subject: Snow Plows - skid steer
Date Posted: 22 Nov 2017 at 9:17am

Son is just shipping another plow to Iowa - a 10' special order unit . He has a new design on plow turn unit for closer coupling to machine and a single turn cylinder .
Seems this is the 3rd unit he has shipped this month down that way .
Fellow he sold it to said he could not find any new units at dealers in area (like snow plow shortage in Iowa) and the couple he did find were outrageous priced junk .

So son was wondering what is up with the dealers and stocking or sales down that way of equipment ,

[TUBE]eJrwK_zj7T0[/TUBE]

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Replies:

Posted By: jerbob
Date Posted: 22 Nov 2017 at 12:08pm

That is sweet for sure. I have a Bobcat 863F turbo and love that girl. Do tons of work. is good for snow removal with the bucket but would love a blade on it. Putting on my bucket list! Sorry I couldn't resist.

Posted By: Coke-in-MN
Date Posted: 25 Nov 2017 at 9:14am

Give him a call he ships nation wide .
He just had 2 more orders from Iowa for tree puller and a backhoe - then a snowplow here going to southern MN .

His new design turn cylinder arrangement was going to be the new standard but one order wanted to pick up a unit on Monday so he is making that unit up from old stock he had .
Seems a couple orders now for 10' plows for the larger machines .

Posted By: jerbob
Date Posted: 25 Nov 2017 at 9:17am

When able and ready I sure will.

watched the video a couple of times and it's a solid unit.

Posted By: Coke-in-MN
Date Posted: 03 Dec 2017 at 9:44am

He just got another order for a special built snow puller - a 10' blade on a skid loader plate for removing snow from sunken loading dock areas - kind of truck pit to back trailers into.

Seems the contractor says his operators can't tip bucket on machines to back-drag snow from these areas without ripping bumpers off the dock edge .
So piece is like a box blade for tractor 3 point but cutting edge angle is set by tipping the unit to desired angle .

Posted By: jerbob
Date Posted: 03 Dec 2017 at 3:38pm

Pretty sweet.