720 Sickle bar
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138130
Printed Date: 27 Apr 2024 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 Sickle bar
Posted By: AC720Man
Subject: 720 Sickle bar
Date Posted: 05 May 2017 at 10:25pm
http://s558.photobucket.com/user/rbadhd/media/IMG_0734_zpsp4b0dgbb.jpg.html" rel="nofollow"> http://s558.photobucket.com/user/rbadhd/media/IMG_0733_zps5kdzhmpp.jpg.html" rel="nofollow">
I recently purchased this origional paint, slightly used sickle mower for my 720. Just got around to mounting it to do some mowing. My cables that I use for the belly mower appear to be to short especially for the right side. I am hoping someone on the forum has one of these and can tell me if they took a different cable and the length. Thanks ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: den/southern illinoi
Date Posted: 06 May 2017 at 4:46am
|
Yes, there is a longer cable for the right side. The left side cable is the same. Den ------------- Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: ac720nut
Date Posted: 06 May 2017 at 5:37am
|
Robbie, nice looking tractor, I'ld be afraid to use for fear of getting it dirty. I looked a lot of places for that cable and was unsuccessful in finding one, I ended up reworking mine with a lift cylinder for the cutter bar and use the cables for mower deck to lift. I've never been able for some reason to get my pictures to post here if you want to see send your email and I'll share that way.
|
Posted By: AC720Man
Date Posted: 06 May 2017 at 4:51pm
|
Sending pm now, would love to see. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 06 May 2017 at 4:54pm
|
I restored this 720 about 6 years ago. I do some work with her but I have another 720 origional paint as the work horse. Just looks to good on this one not to share the picture. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 07 May 2017 at 7:21am
|
Den is there anyway you could get me a measurement of the right side cable? Hole to hole of the attaching points? Thank you in advance. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: den/southern illinoi
Date Posted: 07 May 2017 at 9:51am
|
I will see what I can do. Den ------------- Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: AC720Man
Date Posted: 07 May 2017 at 3:22pm
|
Thank you sir! I have a spare cable off a scrap machine. I am going to cut the attach ends off to reuse. A good friend used to raise poultry and had to make cables to raise the curtains on the sides of the building. He has the crimps and tool to make factory looking cable. I just need the total length to make one to fit and I will be in business. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 02 Jun 2017 at 11:04am
|
Picked up some cable, crimp ends from a local Agri supply company, and made my own cable for the right side of the mower. Guessed at the length but it works well. This mower works just like my dads 80 R. Very happy with it now that I have a cable that makes it work correctly ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |