Garden Tractors - Rebuilding a Kohler Carb from a 716

Print Page | Close Window

Rebuilding a Kohler Carb from a 716

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137803
Printed Date: 28 Apr 2024 at 12:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rebuilding a Kohler Carb from a 716

Posted By: KevinON
Subject: Rebuilding a Kohler Carb from a 716
Date Posted: 26 Apr 2017 at 3:13pm

I am rebuilding the carb off of my Allis 716 with the K341 engine. I got a new throttle shaft with it, and it came with both a rubber and felt gasket. Do they both go on the top of the carb, and if so, which one is below the other? Thanks.

Replies:

Posted By: jaybmiller
Date Posted: 10 May 2017 at 7:30am

I'm thinking rubber between carb and block, felt between carb and air filter. I've got a few Kohlers here ( on Ford LGTs...) and they only have ONE gasket between 'things'.

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: HudCo
Date Posted: 10 May 2017 at 10:07am

felt goes on top

Posted By: KevinON
Date Posted: 11 May 2017 at 10:53am

Thanks, guys!