Pulling Forum - Cam gear

Print Page | Close Window

Cam gear

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137790
Printed Date: 06 May 2024 at 10:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Cam gear

Posted By: bigcountry48
Subject: Cam gear
Date Posted: 26 Apr 2017 at 1:00am

I'm looking to buy an adjustable cam gear for a wd45 cam. I've got the 3 bolt pattern for the gear. Anybody that's got anything, pm me pictures and a price. Thanks in advance.

-------------
1950 B, 1952 pulling wd, and 1954 wd45

Replies:

Posted By: MACK
Date Posted: 21 May 2017 at 8:25am

Why not slot the holes on your gear. Not a problem with mill and rotary table. MACK

Posted By: Charlie175
Date Posted: 22 May 2017 at 7:05am

How much can you gain by changing the cam gear like this?

Is it only a 1/2 tooth advance that is needed?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: MACK
Date Posted: 22 May 2017 at 9:36pm

Could go more than one tooth. MACK