Farm Equipment - AC Spinner, Rollover or Two Way Plows

Print Page | Close Window

AC Spinner, Rollover or Two Way Plows

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137748
Printed Date: 02 May 2024 at 4:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC Spinner, Rollover or Two Way Plows

Posted By: WNYBill
Subject: AC Spinner, Rollover or Two Way Plows
Date Posted: 25 Apr 2017 at 9:10am

I have seen an ad for a AC 4 bottom, 3 pt. Two Way Plow, it appears to have a hydraulic cylinder and a gauge wheel. Have looked through Plows 101 and I only find a series 70 two way and only in 2 or 3 bottoms and it does not look like the picture in the ad. The 80 series Two Way is listed in 101 as only one bottom.

It is 100 miles away and too many bottoms and too much money. What might it be? Is there a chance I could remove a bottom or even two?

Bill

Replies:

Posted By: DennisA (IL)
Date Posted: 25 Apr 2017 at 10:45am

Could you post a picture of the plow?

-------------
Thanks & God Bless

Dennis

Posted By: Dave (Mid-MI)
Date Posted: 25 Apr 2017 at 2:33pm

The 70 and 80 series two way plows were available in 2 or 3 bottom sizes. A-C also offered heavy duty two way plows made in Oxnard. The 900 series was available in 3 or 4 bottom sizes. They had solid beams with no shear bolts or trip mechanism. The 800 series was also available in 3 or 4 bottom sizes, but had a bolt-on extension available to add a 5th bottom. These were available with shear bolt or spring trip beams. I have parts catalogs for both, and could possibly ID a plow from a picture.

Posted By: WNYBill
Date Posted: 26 Apr 2017 at 7:52am

Dave, sent you a PM

Posted By: Eldon (WA)
Date Posted: 26 Apr 2017 at 11:15am

I've seen ads for AC 4 and 5 bottom rollover plows out here....would take a big tractor to handle them

-------------
ALLIS EXPRESS!
This year:

Posted By: injpumpEd
Date Posted: 26 Apr 2017 at 12:27pm

In the very late 70's, dad bought an AC 4 bottom 2 way plow for the 7040. It was set up for on-land, so we wouldn't have to drop the duals since they were cast iron, not pressed.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: JohnCO
Date Posted: 27 Apr 2017 at 12:29am

I have a 4 bottom spinner, don't know the number. The fourth bottom unbolts from the frame. Hard to find parts for it though.

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: WNYBill
Date Posted: 27 Apr 2017 at 7:15am

Thanks to everybody, it looks like the 4th bottoms will unbolt easily. But, I still may have too much plow for my 6060.

Bill