Garden Tractors - 712 with cub rear end

Print Page | Close Window

712 with cub rear end

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134486
Printed Date: 05 May 2024 at 6:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 712 with cub rear end

Posted By: Ronnie
Subject: 712 with cub rear end
Date Posted: 31 Jan 2017 at 7:05am

Any one ever done this and have pictures.

Replies:

Posted By: KevinON
Date Posted: 31 Jan 2017 at 3:24pm

I haven't done it, but I am going to put a Cub clutch in my 716 six speed for stock altered pulling. Then I can leave the belt tight. The rear should hold up to stock altered pulling. I hope...lol.

Posted By: Ronnie
Date Posted: 31 Jan 2017 at 3:38pm

I am going for stock/alters .
Not Shure on what the engine is going to be.

Posted By: KevinON
Date Posted: 31 Jan 2017 at 3:53pm

Mine is the stock 16hp K341 Kohler. We are allowed 60 thou overbore.

Posted By: Ronnie
Date Posted: 31 Jan 2017 at 4:00pm

I'm thinking I'm going to run a 12 hP kohler with some mods.

Posted By: ac720nut
Date Posted: 31 Jan 2017 at 7:07pm

Ronnie sent you a PM . Mine was a B 112 with cub running gear and alky burning Kohler.

Posted By: HudCo
Date Posted: 11 Feb 2017 at 7:54pm

ac720nut do you have a picture ? i have been watching for a b112 to put my cub running gear and command 25 in

Posted By: ac720nut
Date Posted: 11 Feb 2017 at 8:58pm

I only have one picture of it anymore and I can't get pictures to post here.

Basicly cub but with B 112 sheet metal just about the way they all do.

Had Dart center section in rear. ran a pressure plate and disc out of an Economy Garden tractor, 3 finger never had it slip, I built the flywheel out of billet aluminum.

Pm me an email and I'll try and send you a picture.