Print Page | Close Window

Help ples!!!

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134346
Printed Date: 28 Apr 2024 at 4:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Help ples!!!
Posted By: dheker
Subject: Help ples!!!
Date Posted: 27 Jan 2017 at 12:30pm
Hello, i have a allis chalmers B 110, i have it for almost 4 year. I pull it a part clean up( was really rusty) I put all together but I'm having problems with the electrical, who have it before converted to 12v, took the magneto out an put a coil, soo I try to fallow the diagramsame but is too confusing



Replies:
Posted By: farmtoybuilder
Date Posted: 27 Jan 2017 at 1:51pm
They were all 12 volt. I have a regular wiring diagram from operator book. But nothing showing how to wire coil up.

-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.   


Posted By: dheker
Date Posted: 27 Jan 2017 at 2:02pm
Oh... idk is a mess, the magneto is missing, needs a solenoid?.... I will to send pictures.


Posted By: farmtoybuilder
Date Posted: 27 Jan 2017 at 7:13pm
1st b-110's had starter button and later used key ignition, I find it soon, Though I had a saved.



-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.   


Posted By: ACmowerguy
Date Posted: 27 Jan 2017 at 7:25pm
If you have push-button start you don't need a solenoid.

-------------
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments


Posted By: dheker
Date Posted: 11 Apr 2017 at 4:39pm
Hello, some one knows what magneto coil fits on AC B110


Posted By: HudCo
Date Posted: 11 Apr 2017 at 10:12pm
whats the model type and code on the engine it will be on the sheet metal  give me that and i will look up all the part numbers  but i think the briggs part number i 298968  but i need model and type to know for sure


Posted By: HudCo
Date Posted: 11 Apr 2017 at 10:15pm
some one must have tryed to make it into a battery ingntion like a kohler ?


Posted By: dheker
Date Posted: 12 Apr 2017 at 12:57pm
Is a Briggs & Stratton 243431. The old owner converted the ignition switch from magneto to a coil and is not giving me a good spark, so I thought to put a magneto back in how it has to be.


Posted By: HudCo
Date Posted: 13 Apr 2017 at 9:46am
points 298185 , condensor 298060 , armatuture ,mag 298986  briggs and stratton parts  same engine as my 101 mine is used daily .   this engine cannot be changed over to a mag only and elimanate the pionts without sending the flywheel to briggs to change  the polarity of the magnet.  but i probley have adjust the points every three or four years


Posted By: talntedmrgreen
Date Posted: 14 Apr 2017 at 8:45am
Any pictures?  Hard telling where it could be wired wrong, but converting to a battery ignition with a typical coil is extremely simple.  But, getting the wiring right is only part of the equation.  Need to have a good coil, good condenser, clean/gapped points, good plug, etc.  I'd start with wiring.  

First, the key switch needs to be swapped as well.  Your hot lead will go to it now, and then on to your coil, whereas the OEM key switch was simply a ground to the points.  Your starter button remains, and is wired in no different than with the magneto armature setup.

The coil will need a condenser wired to the (-) terminal, and the same to the points.  This is for an internal ballast coil.  If you don't have an internally resisted coil, then you need to add a ballast to the (+) wire to the coil.



-------------
Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494


Posted By: Jim Hancock
Date Posted: 14 Apr 2017 at 11:10am
These pics sure make the explanation a lot clearer. 
This would be a very good article to add to the knowledge base. 


-------------
How blessed we are by HIS GRACE!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net