Pulling Forum - Whiskey Throttle Vid

Print Page | Close Window

Whiskey Throttle Vid

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132798
Printed Date: 04 May 2024 at 5:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Whiskey Throttle Vid

Posted By: Beirnesy
Subject: Whiskey Throttle Vid
Date Posted: 18 Dec 2016 at 8:05pm

seen this on you tube and thought I would share

https://www.youtube.com/watch?v=xAOOIk_fAvY" rel="nofollow - https://www.youtube.com/watch?v=xAOOIk_fAvY

-------------
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716

Replies:

Posted By: DiyDave
Date Posted: 18 Dec 2016 at 8:25pm

[TUBE]xAOOIk_fAvY[/TUBE]

Posted By: bsallis180
Date Posted: 18 Dec 2016 at 9:13pm

Repowerd with cummins on alky

Posted By: 7040
Date Posted: 24 Dec 2016 at 12:17pm

Green county machine built that 5.9 Cummings repower

Posted By: KevinON
Date Posted: 25 Dec 2016 at 7:57am

Does he use a 185 rear in that tractor?

Posted By: bsallis180
Date Posted: 25 Dec 2016 at 8:47am

Yes from bell back it's orange

Posted By: mf440
Date Posted: 25 Dec 2016 at 3:10pm

From front of trans back lol. The bellhousing / power derector housing is missing has a clutch can

Posted By: KevinON
Date Posted: 25 Dec 2016 at 4:44pm

Who makes the clutch can??

Posted By: DougG
Date Posted: 25 Dec 2016 at 5:26pm

Really do tell on the parts needed since the PD is missing;

Posted By: mf440
Date Posted: 25 Dec 2016 at 5:37pm

clutch can/ SFI bellhousing , input shaft with an adapter to the transmission

Posted By: DougG
Date Posted: 25 Dec 2016 at 5:59pm

Yes who makes an SFI clutch can for these?

Posted By: mf440
Date Posted: 25 Dec 2016 at 8:26pm

Probell or any other manufacturers and any good machinist can make the rest of the parts needed to make it work.

Posted By: Larry W.
Date Posted: 26 Dec 2016 at 12:29pm

You can make most any bellhousing work, mopar or chevy steel bell housing and custom backer plate for the motor

Posted By: Jerald/KS
Date Posted: 27 Dec 2016 at 12:58pm

Whisky Throttle is our old Orange Crush light super. It was set up with with a re drilled rear plate and a Hemi clutch can, crower 3 disc clutch, chevy gear reduction starter, Pro Fab 2 speed, solid driveline and couplers to allis input shaft. All gears in allis trans removed. Ran a final gear ratio of 19-1. Our second tractor Smokin Assets was set up the same, but even removed axle tubes and machined aluminum adapters to mount finals directly on rear end housing.

Posted By: Acllss puller
Date Posted: 25 Jan 2017 at 8:14pm

How much ton build another set of aluminum adapters?