| Author |
 Topic Search  Topic Options
|
Zyta 
Orange Level
Joined: 19 Jan 2010
Location: Ontario
Points: 238
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WD45 PTO SEAL
Posted: 22 Feb 2010 at 6:07pm |
|
|
 |
|
Sponsored Links
|
|
|
norm [ind]
Orange Level
Joined: 16 Sep 2009
Location: BOURBON,IN.
Points: 667
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 6:33pm |
|
we stock that seal 1-800-254-3116
|
|
Alberta Phil
Orange Level
Joined: 13 Sep 2009
Location: Alberta, Canada
Points: 3656
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 7:16pm |
|
I would think that you could probably take it to any bearing supplier and find a match.
|
|
Osage_Orange
Orange Level
Joined: 11 Sep 2009
Location: SW MO
Points: 1593
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 7:25pm |
|
I needed a "quick fix" a few years ago, and could not find one locally as thick as the original. Went to a bearing supply house, bought two with the correct OD and ID and installed them in tandem. They're still running and don't leak.
|
|
Why is there never time to do it right the first time, but always time to go back and fix it?
|
|
fixer1958
Orange Level
Joined: 13 Feb 2010
Location: kansas
Points: 2435
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 7:29pm |
Napa has them. Just give them the old one to match it up. About $3 and use 2 as mentioned before.
Yours has numbers, mine didn't.
|
|
Skyhighballoon(MO)
Orange Level
Joined: 11 Sep 2009
Location: Pilot Grove, MO
Points: 3115
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 7:39pm |
|
I just bought one from my AGCO dealer, PN 70224779. National Seal #470061. HTH. Mike
Edited by Skyhighballoon(MO) - 22 Feb 2010 at 7:39pm
|
|
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
|
Zyta
Orange Level
Joined: 19 Jan 2010
Location: Ontario
Points: 238
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 7:58pm |
Thanks for all the info Guy's I would like to find one just like the original if possible.
Jim
|
|
norm [ind]
Orange Level
Joined: 16 Sep 2009
Location: BOURBON,IN.
Points: 667
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 8:11pm |
|
OUR STOCK IS 224779
|
|
stu(ON)
Orange Level
Joined: 12 Sep 2009
Points: 377
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2010 at 8:46pm |
What you have is the original seal made by Chicago Rawhide. Chicago Rawhide was absorbed by SKF Group a couple of decades ago, and they gradually phased out the CR unique seals. I actually found a New Old Stock CR seal of the right size a year or so ago by shopping at a local hydraulic & seal shop.
You might find some NOS AGCO or CR if you shop long & hard. But, if Norm [Ind] has got them in stock, you are farther ahead just to have him ship one to you.
|
|
