Need a factory service manual for a D15 series 2. A little greasy is OK Thanks Gary. Man, I'm gonna miss this old format!

Me too. Tony

http://www.tonystractors.com

call jensales at 800-443-0625.they have all kinds of manuals.i know the allis manuals i got are reproductions of the factory manual

I get all my manuals direct from ACGO. last ones i got from jensales you couldn`t read. Tony

http://www.tonystractors.com

We can post anything now, since it's ok nobody wants to. gonna miss this place.

My 2 cents: Jensales prices are through the roof for what you get. All the manuals I have seen from them have extremely dark pictures at best, and illegible text and pictures at worst. All for 2-3X what a decent original copy would cost you on Ebay. I wouldn't buy anything from them that could be found elsewhere. I realize that this is a pretty harsh criticism, but quality speaks for itself.

we can get allis d15 factory manuals 989-379-2721

I just tried to start a new topic here and it isn't gonna let me so this might be the last topic and maybe the last post. Adios, Amigos

Darin I would like to commend you on the fine job you did with the forum for years. I did finally get on the other one by changing my user name and pass word and that is okay , but regardless of what the reason for changing and how great the new forum may be it will be many years before anyone will ever come up with a system that will ever be a fraction of the greatness we had with this old system. I am not complaining about the new system and I surely do not want to tell you it is a mistake , but it will be a long time before the new one will ever be as great as theold one. In my life time I have seen many changes . Some were great and many were a mistake. I hope you can look back in a few years and say that old man that sent me that post sure did not know what he was talking about. Thanks again for the best forum ever on the internet. R Rose Ron {KY}

Darrin has continued to improve the new site. He has had 2000 tractor posts in the last week. He has had 500 barn and equipment posts this week, and 500 political posts this week. I think its obvious he has a great new site and has already surpassed the original in less than a week. Give it up , and go have some fun at the new site.

still here

This site has been great and will be missed.

The old girl still holds on. I know Darin can pull the plug anytime he wants to and I am sure he has a lot of feelings for the old forum. He will never have to be ashamed of the old girl or man which ever it may be. I am sorry but, I just cannot feel as good about the new sight. I feel it will be great in days to come but for many of us it just does not seem possible it can ever be as good. The old one was not fancy and at the same time it was not complicated. Maybe it had it's faults but the good always out shined the bad. Darin I do not mean to dwell on the past but it was something you should have been very proud of. Enough said for now and thanks again. Ron{KY}

Hey Darin I keep thinking you might change your mind. I am only kidding as I know you could not go back now. Ron{KY}

so long, it's been good to know you!!!!!!!!!!!!!!!

hi

wow it still worked

Andrew she just takes a licking and keeps on ticking.I know one of these days she will have her life support plug pulled and that will be a sad day. It would be something to know how many visits a day she still gets by people who never sign on. Ron{KY}

I'm still here!!!!!!!!!!!!!!!!!!!!!

as much as most don't like change,, the new forum is not that bad to move around in, just takes a bit of getting used to. agreed this format will be missed, but i think the new one will be a needed improvement for Darin to maintain, i know this older format was requiring more and more time to keep running. with the constant advancement in technology, this format was almost to simple and plain for today's standards. just my opinion.

Lars , I read your reply and I understand what you said . I am not bitter or crying sour grapes just hate to see something as great as it was fly away in the wind. I still cannot see how something as simple as this site is can be more trouble to maintain then the new one. Ron{KY}

Me three, Tony.

It's been a great site, Darin. Thanks for caring about us enough to have done it in the first place, and now to make it even better.

I still think this site is the way to go.

I just stop by every day to pay my respects to the great site we had and then check my mail . I guess when this one is gone completely all I will have to do is check my e-mail and get out of my wife's way.Ron{KY}

I'm still holding on!! Can't take this mmmm uucchhh llloongerrrr!!! LOL!!!

correct

Huh, I thought this was done!

Still here?, Anybody out there?

Gary as I have said before I come by here on the old site every day just hoping some day all of the old friends will come by for a reunion. Ron{KY}

Ah what the heck, I just thought I would stop in and say hi to a few buddies that are still over here. When you guys are ready come on over to the new one it's really not that bad. I was not sure either but I'm really getting used to it as it has some very nice features. I just had to post one more on the old one LOL!

Dennis thank you for stopping by . I know it is not the same but when you have once enjoyed a site as much as some of us have enjoyed this old site we know it can never be the same but some of us are still hoping.Ron{KY}

helllooo...

Helloo ello ello lo o!!!! I'm still hear ear ear!!!

I have some questions before I assemble this engine , Machine work is done, now I am cleaning parts. Still waiting on some parts. Reuseing the sleeves and rods/ pins/ pistons. What have the guys with experience have to add about honeing, piston prep, ring and bearings ,etc? Thanks, Gary

Gary is this a engine you or someone converted to gas?I thought all of them were diesels . Never too late to learn I guess. Ron{KY}

I reckon this thread is still ALIVE!