This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Construction and other equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


HD11B RESTORATION HAS BEGUN

 Post Reply Post Reply Page  12>
Author
Message
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Topic: HD11B RESTORATION HAS BEGUN
    Posted: 23 Dec 2016 at 5:09pm
Ok, Got behind on this restoration. I see it was over 3 years ago that the original post was done. We of course did the HD15 and the GRAPPLE HD 11 while waiting for the perfect pieces to show up. (and we think they did yesterday). We got a bad case of "IRON DISEASE" when this showed up on an auction block in N. Calif. It is a 1957 HD11S farm tractor. Some of the features we were looking for were dry type steering clutches,no boosters etc. photo PC220011_zpskrex03sm.jpg
The swing frames and undercarriage are almost like new. We will be removing all of that for putting on track guards and blade trunnions and whatever else I can't remember . photo PC220009_zps6zirfr4u.jpg
So some of your trained eyes might notice that this has an 11000 engine in stead of the original Lanova style engine.  The 11000 was put in many years ago as an update and it has been parked in a barn for many years. We of course have lots of homes for an 11000 and it will be coming out and be replaced by an orginal 516 Lanova style.
  Our project is to restore one of these to this original 1955 model

It will look like this when we are done. The drop dead date will be the third week in March for the Redwood Region Logging Conference antique equipment display in Eureka, Ca.

  Here's the original post to the Forum for more story.
 
http://www.allischalmers.com/forum/forum_posts.asp?TID=67724&KW=NEXT+RESTORATION&PID=533383&title=next-restoration-starting#533383

Also a link to the tractor running.
 
http://vid966.photobucket.com/albums/ae147/doowder1/HD%2011%20RESTORATION/HD%2011%20RESTORATION_zpscaw0azct.mp4

We''ll keep you posted (LOL)     MERRY CHRISTMAS!!
Back to Top
Sponsored Links


Back to Top
Eric B View Drop Down
Orange Level
Orange Level
Avatar

Joined: 09 Feb 2012
Location: British Columbi
Points: 880
Post Options Post Options   Thanks (0) Thanks(0)   Quote Eric B Quote  Post ReplyReply Direct Link To This Post Posted: 23 Dec 2016 at 6:43pm
And Merry Christmas to you Mel and associates... you guys are the most focussed, hard working, result producing guys in the restoration of equipment that I have ever witnessed!! Do take time to celebrate the true reason for Christmas and then we'll eagerly look forward to your progress updates. Best wishes for 2017 also! Thanks for all the interesting posts and pictures that you post here!!
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
Back to Top
SteveM C/IL View Drop Down
Orange Level Access
Orange Level Access


Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 7910
Post Options Post Options   Thanks (0) Thanks(0)   Quote SteveM C/IL Quote  Post ReplyReply Direct Link To This Post Posted: 23 Dec 2016 at 9:18pm
Extremely nice/straight tractor.Undercarriage looks like new!
Back to Top
darrel in ND View Drop Down
Orange Level
Orange Level
Avatar

Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8567
Post Options Post Options   Thanks (0) Thanks(0)   Quote darrel in ND Quote  Post ReplyReply Direct Link To This Post Posted: 23 Dec 2016 at 10:22pm
Ditto on what the others said. So happy that there are guys with iron disease that keep this stuff from going to China. I must only have "half iron disease." I buy the stuff to keep it from going to China, but I don't seem to get it restored the way you and your crew does. I swear I'm going to have to haul that 5G out to you and hire you to finish it up. My uncle has some childhood memories on an HD5G, and he is chomping at the bit for me to get it together so he can come and play with it. Better get it done before it's too late. Merry Christmas to you and your family Mel. And keep stuff coming. Darrel
Back to Top
shameless (ne) View Drop Down
Orange Level
Orange Level
Avatar

Joined: 08 Jul 2016
Location: nebraska
Points: 7463
Post Options Post Options   Thanks (0) Thanks(0)   Quote shameless (ne) Quote  Post ReplyReply Direct Link To This Post Posted: 23 Dec 2016 at 10:35pm
I too enjoy all the things you do and post. even tho I don't have my HD5 anymore, I still enjoy looking and watching them! Happy Holidays to you all and stay safe!  p.s. hows the building coming along?
Back to Top
Sugarmaker View Drop Down
Orange Level
Orange Level
Avatar

Joined: 12 Jul 2013
Location: Albion PA
Points: 8166
Post Options Post Options   Thanks (0) Thanks(0)   Quote Sugarmaker Quote  Post ReplyReply Direct Link To This Post Posted: 24 Dec 2016 at 2:42pm
Mel, and all the AC folks,
Merry Christmas! Always enjoy Mel's posts and work on the big machines!
Regards,
 Chris
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
Back to Top
ACcrazy View Drop Down
Silver Level
Silver Level


Joined: 30 May 2012
Location: Eureka, Califor
Points: 97
Post Options Post Options   Thanks (0) Thanks(0)   Quote ACcrazy Quote  Post ReplyReply Direct Link To This Post Posted: 26 Dec 2016 at 10:02am
Awesome Mel!  Smile
Are you going to build this one to look like the one with your dad in the pic?


Edited by ACcrazy - 26 Dec 2016 at 10:05am
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 26 Dec 2016 at 12:36pm
Yes, That's the plan.
Back to Top
Lee Bradley View Drop Down
Bronze Level
Bronze Level
Avatar

Joined: 13 Oct 2009
Location: Kingston, WA
Points: 115
Post Options Post Options   Thanks (0) Thanks(0)   Quote Lee Bradley Quote  Post ReplyReply Direct Link To This Post Posted: 26 Dec 2016 at 1:22pm
I remember the HD-9 having an over-center spring to reduce the steering clutch pull. Does the HD-11 have those?
Back to Top
tadams(OH) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 17 Sep 2009
Location: Jeromesville, O
Points: 9553
Post Options Post Options   Thanks (0) Thanks(0)   Quote tadams(OH) Quote  Post ReplyReply Direct Link To This Post Posted: 26 Dec 2016 at 3:12pm
you and your crew do a great job on the construction equipment. Hope you had a Merry Christmas.
Tom
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 26 Dec 2016 at 4:27pm
Lee, yes the over center spring levers for the steering clutches stayed the same from the HD9 to the HD11s serial number 6069 (1960) when they started using a booster similar to the HD15s 20s early 16s etc. In 1964 stating with ser# 10,000 they went to oil steering clutches with inside hydraulic controlled clutches.
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 03 Jan 2017 at 9:22pm
So we had a rainy day schedule and I gathered up some "DONOR TRACTOR" parts. You have to have some imagination and a vision. photo hd11 retoration 067_zpstcxen5ku.jpg
The canopy needs some body work and cleanup  photo hd11 retoration 072_zpsajr2vp6m.jpg
So the winch needs lots of attention. The cable hard nose came off the original tractor with our fathers picture. photo hd11 retoration 069_zpsskgousj6.jpg
So we'll be dismantling the running tractor to turn the swing frames up to put these bottom track guards on. If you want to see how that's supposed to go it will be about the same as the grapple facelift episode. Also the blade trunions have to be changed.

http://www.allischalmers.com/forum/forum_posts.asp?TID=123759&KW=grapple+facelift&PID=1013415&title=hd11b-grapple-facelift-restoration#1013415
Back to Top
JohnCO View Drop Down
Orange Level
Orange Level
Avatar

Joined: 11 Sep 2009
Location: Niwot Colo
Points: 8992
Post Options Post Options   Thanks (0) Thanks(0)   Quote JohnCO Quote  Post ReplyReply Direct Link To This Post Posted: 04 Jan 2017 at 12:23am
Good to see progress!  Also good to see rain and puddles in the yard.  Some of that stuff is supposed to come east and make 10" of snow down here, a couple feet in the mountains.  Shameless thinks he's the only one who can make snow, we'll show him!
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
Back to Top
Tad Wicks View Drop Down
Orange Level
Orange Level
Avatar

Joined: 27 Mar 2011
Location: Shandon, CA
Points: 2160
Post Options Post Options   Thanks (0) Thanks(0)   Quote Tad Wicks Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2017 at 2:36pm
Mel,if you need engine parts heads manifolds or things like that, I still have the one I took out of my 11.  Tad
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2017 at 8:55pm
Ok, went out to "DONOR TRACTOR" row and recovered this 1955 HD11B for going under the wrench. It was one of our first adventures about 15-20 years ago. I have pictures hauling it across the Golden Gate Bridge. It fit fine, only 10 feet wide, no problem. We did find out about 5 years later that "you can't do that without a permit and CHP escort" LOL  of course now that it's a" SANCTUARY CITY" don't know what they would do with us now. photo 007_zpsx6yhe0zd.jpg
Over the years we have found some better specimens including the current one we just got for this project. This tractor has badly damaged intermediate pinion cap and stripped bolts in the case. It was a common problem with construction and logging tractors, not so with farm tractors.   photo 009_zpshezcemuf.jpg
So were planning on using the blade, the engine, fenders and who knows what else. photo 011_zps3g5kaoh9.jpg
The plan is to take the blade off and then remove all the hydraulics and hardnose and try running the engine and see if it will do the job. It was running when we parked it. It is a 516 Lanova (Buda) that would be the original engine for the year.
Trying o get some stuff close to the shop. We're expecting 6-10" of rain starting tomorrow threw next week and yes we're still working on the BIG BUILDING (but it's not waterproof yet)
Back to Top
Steve allis dozer View Drop Down
Silver Level Access
Silver Level Access


Joined: 10 Apr 2011
Location: Australia
Points: 232
Post Options Post Options   Thanks (0) Thanks(0)   Quote Steve allis dozer Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2017 at 9:17pm
Hey Mel looks like a good set of rippers on that tractor 
Back to Top
Eric B View Drop Down
Orange Level
Orange Level
Avatar

Joined: 09 Feb 2012
Location: British Columbi
Points: 880
Post Options Post Options   Thanks (0) Thanks(0)   Quote Eric B Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2017 at 9:20pm
Mel, I know this may be slightly off topic but ...how many machines do you have in your yard including all donor machines? If you're not sure and it's raining don't do the count 'til a sunny day LOL. I understand I may need to wait for the answer 'til after the show you're getting ready for ...you're a busy man Embarrassed
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
Back to Top
darrel in ND View Drop Down
Orange Level
Orange Level
Avatar

Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8567
Post Options Post Options   Thanks (0) Thanks(0)   Quote darrel in ND Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2017 at 10:38pm
Keep the good stuff coming, Mel. Keep it coming! It's always a pleasure reading up on your progress. Much more progress there than at my place. Lol Darrel
Back to Top
shameless (ne) View Drop Down
Orange Level
Orange Level
Avatar

Joined: 08 Jul 2016
Location: nebraska
Points: 7463
Post Options Post Options   Thanks (0) Thanks(0)   Quote shameless (ne) Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jan 2017 at 1:32am
Mel.....Darrell has a big building that is water proof, and he don't even use it! whew! plus now that he is hibernatering, he won't be getting nuthin done for a few months! them poor lonely road graders are just sittin out in the cold and pretty snow!  
Back to Top
Sugarmaker View Drop Down
Orange Level
Orange Level
Avatar

Joined: 12 Jul 2013
Location: Albion PA
Points: 8166
Post Options Post Options   Thanks (0) Thanks(0)   Quote Sugarmaker Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jan 2017 at 10:23am
Mel,
Always enjoy your posts and work on the big machines. I try to learn a little bit from each project!
Hope you don't get washed away!
Regards,
 Chris
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
Back to Top
JohnCO View Drop Down
Orange Level
Orange Level
Avatar

Joined: 11 Sep 2009
Location: Niwot Colo
Points: 8992
Post Options Post Options   Thanks (0) Thanks(0)   Quote JohnCO Quote  Post ReplyReply Direct Link To This Post Posted: 06 Jan 2017 at 9:06pm
Shameless, you forget these guys aren't used to the cold like Darrel is, they'd freeze their thongs off!  (The ones on their feet)
Sure good to read you are getting more rain, we can use the snow!

I guess that means if you ever go to get that HD41, you have to go south all around the bay to get it home?
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 07 Jan 2017 at 9:58pm
Ok, so today's events included getting the blade out of the way photo P1070013_zpsdvz9wng3.jpg
Also got the homemade cab out of the way. Hoping to try to start it and see if it's going to be worthy of this project  photo P1070018_zpszxhmhjua.jpg
Back to Top
michale34 View Drop Down
Silver Level
Silver Level


Joined: 15 Mar 2011
Location: arkansas
Points: 472
Post Options Post Options   Thanks (0) Thanks(0)   Quote michale34 Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2017 at 4:32pm
did those steering clutch leavers come like that one the orange machine I have never seen any like that
Back to Top
JohnCO View Drop Down
Orange Level
Orange Level
Avatar

Joined: 11 Sep 2009
Location: Niwot Colo
Points: 8992
Post Options Post Options   Thanks (0) Thanks(0)   Quote JohnCO Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2017 at 9:00pm
Look at those pictures guys, no ice, no snow, just rain!!!  Gotta be nice.

"If at first you don't succeed, get a bigger hammer"
Allis Express participant
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 09 Jan 2017 at 9:28pm
John, And it rained more today. Were supposed to get 2-3" in the next day. They cancelled schools for tomorrow.
 We did have some 23 degree mornings before this storm got here. And yes were pretty happy with 46 degree rain. It makes lots of steam for the pressure washer.
 photo P1090028_zpsphc8xpvy.jpg
Mike, I already took those steering clutch levers off and fixed them.They must have had a midget operator, the seat was also in a low,low, hole. So we pushed it back in the shop after the steam settled and maybe try to start it tomorrow. photo P1090027_zpsqfteqgv2.jpg
Back to Top
michale34 View Drop Down
Silver Level
Silver Level


Joined: 15 Mar 2011
Location: arkansas
Points: 472
Post Options Post Options   Thanks (0) Thanks(0)   Quote michale34 Quote  Post ReplyReply Direct Link To This Post Posted: 10 Jan 2017 at 4:44pm
my uncle max bought 2 hd11 b like your donor tractor brand new in around 1955 the serial number for one was hd11b3638 if I remember right because one of rear ends was out in the back field till a few years ago
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jan 2017 at 11:52am
Ok, here's where were at. After 40'' inches of rain now were still on a rainy day schedule. We were trying to make sure this 516 Lanova (BUDA) was giong to work for us. photo P1190003_zps4sxyhaqu.jpg
This engine was sitting for 15-20 years. It was running when it was parked, but do to the case and the damage from the intermediate pinion caps we knew we would probably not use the whole tractor again, thus becoming a "DONOR" tractor. We spent extra time with the PSB Bosch fuel injection pump to make sure we didn't damage it from sitting and being stuck. It was a good call because we had lots of problems getting it to work right. Almost threw in the towel do to time. photo P1190006_zps60ajs9bp.jpg
We left it in the tractor and removed as much stuff as possible to work on it.
   Ok, so check this link for the startup.
   
http://vid966.photobucket.com/albums/ae147/doowder1/HD%2011%20RESTORATION/HD11%20START%20U%20TUBE_zps5qpnmnmv.mp4

  So we've made the call to continue with this engine. I think we'll maybe start a new post for further progress reports. David's been cleaning and servicing his paint gun and paint booth (as you know it's outside) We will need a weather break. A Redwood Region Logging Conference representative came by to check up on us and see what we might have for the show this year. Yeah, now we have our feet pretty close to the fire. Parts are going to start flyin so stay tuned!!
Back to Top
Eric B View Drop Down
Orange Level
Orange Level
Avatar

Joined: 09 Feb 2012
Location: British Columbi
Points: 880
Post Options Post Options   Thanks (0) Thanks(0)   Quote Eric B Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jan 2017 at 12:15pm
That is amazing after having sat for so long...must have been well serviced with clean oil to run evenly on all cylinders at once...no stuck valves or low compression!! Good for you guys!!
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
Back to Top
HD6GTOM View Drop Down
Orange Level
Orange Level
Avatar

Joined: 30 Nov 2009
Location: MADISON CO IA
Points: 6627
Post Options Post Options   Thanks (0) Thanks(0)   Quote HD6GTOM Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jan 2017 at 3:18pm
Man o Man I wish I had the time and bucks to come help you guys. I do love the "clankers". Thank you so much for posting this
Back to Top
AC Mel View Drop Down
Orange Level Access
Orange Level Access


Joined: 23 Jan 2010
Location: N.Ca.
Points: 1099
Post Options Post Options   Thanks (0) Thanks(0)   Quote AC Mel Quote  Post ReplyReply Direct Link To This Post Posted: 03 Feb 2017 at 10:40am
So here's where were at. We needed these fenders, because we thought they would be easier to restore. They appear to be very straight. photo P1210004_zpsosw4jqcx.jpg
We also had to cut off all the miscellaneous stuff in the way, mostly the home made canopy posts. Anybody ever use an AIRARC?  ooohhhh what fun!!  Can't call yourselfS a wanna be welder until you've run an AIRARC and made it work. photo P1220008_zpsjd3gytbi.jpg
So these are the brackets for the canopy and blade controls from "donor tractor"3 that also need to be arced off. These will be welded on the fender in the previous picture aventually.
 photo P1220011_zpsfgcirfdf.jpg
So we commenced to turn this perfectly good farm tractor into an old cable logger. photo P1240013_zpswkhyndq0.jpg
This engine was upgraded to an 11000 from a 516 and we have a place for it as soon as we get time. photo P1240017_zps43v6jzaf.jpg
For now it just gets an engine stand. photo P1240019_zpsfjrgkqiw.jpg
Took the fuel tank fenders and battery boxes of in one piece. photo P1260024_zpsgaxjgi2d.jpg
Ok, here's the bottom, stand by. Some assembly required. photo P1270027_zpssiuxbyyw.jpg
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.047 seconds.


Help Support the
Unofficial Allis Forum